Skip to Main Content U.S. Department of Energy
Magnesium - Metal Matrix Composites
Title Author Reference Affiliation
Interfacial reaction in the short-fibre reinforced AlSi12CuMgNi piston alloys Huang Y., Hort N., Dieringa H., Kainer K. U. GKSS Research Centre Geesthacht, Germany
Behaviour of Saffil-fibre reinforced ZE 41 magnesium hybrid MMC in creep and thermal cycling Dieringa H., Hort N., Kainer K.U. Advanced Inorganic Structural Fiber Composites - IV, Proceedings of the 4th International Conference "Advanced Inorganic Fiber Composites for Structural Applications" of the Forum on New Materials, 10th International Ceramic Congress and 3rd Forum on New GKSS Research Centre Geesthacht, Germany
Thermal cycling of light metal matrix composites reinforced with ceramic short-fibres Hort N., Dieringa H., Kainer K.U. Advanced Inorganic Structural Fiber Composites - IV, Proceedings of the 4th International Conference "Advanced Inorganic Fiber Composites for Structural Applications" of the Forum on New Materials, 10th International Ceramic Congress and 3rd Forum on New GKSS Research Centre Geesthacht, Germany
Thermal expansion and dimensional stability of short fibre reinforced AlSi12CuMgNi Huang Y., Hort N., Kainer K. U. International Conference on Composite Materials (2003), San Diego, CA GKSS Research Centre Geesthacht, Germany
Manufacturing of Magnesium Structures Selectively Reinforced by MMC Inserts Ch. Hausmann, O. beffort, EMPA. Thun (CH); V. Polasek, Unitech AG (A); H.P. Degischer, P. Schulze, LKA, Seibersdorf (A); L. Ristow, Daimler-Benz AG, Munchen (D); Mordike, BL, Kainer, KU eds (1998) Magnesium Alloys and their Applications, Hamburg, Germany, Werkstoff-informations gesellshaft. EMPA. Thun (CH) & Unitech AG (A) & LKA, Seibersdorf (A) Benz AG, Munchen (D)
Dynamic Behaviour of Magnesium Matrix Composites in Elevated Temperatures Lach E., Benzler T., Kainer K.U., Bohmann A., Scharf M. Mordike, BL, Kainer, KU, eds (2000) Magnesium Alloys and their Applications, Munich, Germany GKSS Research Centre Geesthacht, Germany
Formation of Mg2Si by Infiltration of C-Fibres-Si-Hybrid-Preforms Kainer K.U., Dieringa H., Schulz P., Reiter, J. Mordike, BL, Kainer, KU, eds (2000) Magnesium Alloys and their Applications, Munich, Germany GKSS Research Centre Geesthacht, Germany
Thermal fatigue of magnesium matrix composites Chmelik F., Lukac P., Kudela S., Kiehn J. Mordike B.L., Kainer K.U. Mordike, BL, Kainer, KU, eds (2000) Magnesium Alloys and their Applications, Munich, Germany GKSS Research Centre Geesthacht, Germany
Potential of discontinuously reinforced alloys for automotive application Kainer K.U., Benzler T., Dieringa H. Chandra, T, Higashi, K, Suryanarayana, C, Tome, C, eds (2000) THERMEC 2000 International Conference on Processing & Manufacturing of Advanced Materials, Las Vegas, NV GKSS Research Centre Geesthacht, Germany
Influence of thermal cycling on properties of Al based MMC's reinforced by ceramic fibres Hort N., Kainer K.U. International Conference on Composite Materials (2001), Beijing, China. GKSS Research Centre Geesthacht, Germany
Microstructure and dilatometric behaviour of reinforced magnesium matrix Dieringa H., Benzler T., Kainer K.U. International Conference on Composite Materials (2001), Beijing, China. GKSS Research Centre Geesthacht, Germany
Effect of thermal cycling on QE 22 + 20 Vol % short fibre MMC's Kumar S., Dieringa H., Kainer K.U. Kaplan, HI editor (2002) Magnesium Technology 2002, TMS, Warrendale, PA GKSS Research Centre Geesthacht, Germany
Low Cost SiCp/AZ91 Magnesium Composites Prepared by RCM S.K. Kim, H-H. Jo and Y-J. Kim Kaplan, HI editor (2003) Magnesium Technology 2003, TMS, Warrendale, PA KITECH(Korea Institute of Industrial Technology) & SKKU(Sungkyunkwan University), Korea
Thermal cycling behaviour of short fibre reinforced AE42 magnesium alloy Dieringa H., Bowles A., Huang Y.D., Hort N., Kainer K.U. Materials Show 2003, Pune, India. GKSS Research Centre Geesthacht, Germany
Compressive Deformation Behavior of the SiCw/Az91 Composite at Elevated Temperature S.B. Li, W.M. Gan, M.Y. Zheng and K.Wu Materials Sci. Forum Vols. 488-489 (June 2005) Harbin Institute of Tech. CHINA
Mechanical properties of short fibre reinforced AlSi12CuMgNi piston alloys before and after dynamic thermal loading Hort N., Huang Y., Dieringa H., Kainer K. U. Synopsium Verbundwerkstoffe und Werkstoffverbunde (2005), Kassel, Germany. GKSS Research Centre Geesthacht, Germany
Effects of interfacial reactions during solidification on mechanical properties in short fiber reinforced AlSi12CuMgNi composites Huang Y.D., Hort N., Kainer K.U. Luo, AA, Neelameggham, N, Beals, R, eds (2006) Magnesium Technology 2006, TMS, Warrendale, PA GKSS Research Centre Geesthacht, Germany
Machining of hybrid reinforced Mg-MMCs using abrasive water jetting Aust E., Elsäßer M., Hort N., Limberg W.: Machining of hybrid reinforced Mg-MMCs using abrasive water jetting Luo, AA, Neelameggham, N, Beals, R, eds (2006) Magnesium Technology 2006, TMS, Warrendale, PA GKSS Research Centre Geesthacht, Germany
Microstructural investigations of Mg-Al alloys containing small amount of SiC nucleants Huang Y.D., Hort N., Anopuo O., Kainer K.U., Vildrich G., Schiffl A., Liu Y. Beals, RS, Luo, AA, Neelameggham, NR, Pekguleryuz, MO, eds (2007) Magnesium Technology 2007, Orlando, FL GKSS Research Centre Geesthacht, Germany
Microstructural investigations of Mg-Al alloys containing small amount of SiC nucleants Huang Y., Hort N., Anopuo O., Kainer K. U., Vidrich G., Schiffl A., Liu Y. Beals, RS, Luo, AA, Neelameggham, NR, Pekguleryuz, MO, eds (2007) Magnesium Technology 2007, Orlando, FL MagIC-Magnesium Innovation Centre
Mg-6Zn/1.5%SiC Nanocomposites Fabricated by Ultrasonic Cavitation Based Solidification Processing Guoping Cao, Hongseok Choi, Juan Oportus, Hiromi Konishi, S. Kou, R. Lakes, and Xiaochun Li Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA University of Wisconsin-Madison, Madison, Wisconsin
Microstructures and Mechanical Properties of Magnesium Composite Alloys Dispersed with Carbon Nanotube via Powder Metallurgy Process Katsuyoshi Kondoh, Hiroyuki Fukuda, HIsashi Imai, and Bunshi Fugetsu Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA Joining and Welding Research Institute, Osaka University, Osaka Japan
Effect of Graphite Particle Size on Wear Property of Graphite and Al2O3 Reinforced AZ91D-0.8%Ce Composites Zhang M., Liu Y., Yang X. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. school of material science and engineering, Key Laboratory of Automobile Material of Ministry of Education
Laser Fabricated Ni-Si-Mg Intermetallic Composite on AZ91D-Magnesium Alloy Sun Y. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. School of Mechanical Engineering, Xinjiang University
Micromechanical Study of Enhanced Plasticity of Metallic-glass-matrix Composites Chunyu Z., Han L. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. Shenzhen Institute of Advanced Technology, Chinese Academy of Science
Microstructure and Mechanical Properties of Mg-Cu-Y-Zn Bulk Metallic Glass Matrix Composites Prepared in Low Vacuum Wang J., Wu X., Pan F., Tang A., Ding P. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. National Engineering Research Center for Magnesium Alloys, Chongqing University
The Study of Carbon Fibers with MgO Coatings Reinforced Magnesium Composites Xia C., Wang H., Ma N., Lu P., Li X. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. Shanghai Jiaotong university
Thermal Expansion and Dimensional Stability of M40 Carbon Fibre Reinforced AZ91 Magnesium Alloy Composite Meihui S., Ziyang X., Gaohui W., Ning W., Wenshu Y. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. School of Materials Science and Engineering, Harbin Institute of Technology
Nanocrystalline Mg-Matrix Composites with Ultrahigh Damping Properties B. Anasori, S. Amini, V. Presser, and M. Barsoum Sillekens, WH, Agnew S.R., Neelameggham NR, Mathaudhu, SN, eds (2011) TMS Magnesium Technology 2011, San Diego, CA, USA. Department of Materials Science and Engineering, Drexel University, Philadelphia, PA 19104,
TiNi Reinforced Magnesium Composites by Powder Metallurgy Z. Esen Sillekens, WH, Agnew S.R., Neelameggham NR, Mathaudhu, SN, eds (2011) TMS Magnesium Technology 2011, San Diego, CA, USA. Industrial Engineering Department, Çankaya University, Ögretmenler Cad. No:14, Balgat/Ankara, 06530, Turkey
Effect of Nano-Alumina and Copper Micron Size Particulates on Microstructure and Mechanical Properties of Magnesium Alloy AZ31 B. Nguyen, K. Tun, and M. Gupta Mathaudhu, SN, Sillekens, WH, Neelameggham N.R., Hort N, eds (2012) TMS Magnesium Technology 2012, Orlando, FL, USA. Department of Mechanical Engineering, National University of Singapore 9 Engineering Drive 1, Singapore 117576
On the Effect of Ti2AlC on the Formation of Thermally Stable Mg Nano Grains B. Anasori, and M. Barsoum Mathaudhu, SN, Sillekens, WH, Neelameggham N.R., Hort N, eds (2012) TMS Magnesium Technology 2012, Orlando, FL, USA. Department of Materials Science and Engineering, Drexel University, Philadelphia, PA 19104, USA
Sliding Wear Behavior of Squeeze Cast Magnesium Composite AM60-9% (Al2O3)f A. Banerji, H. Hu, and A. Alpas Mathaudhu, SN, Sillekens, WH, Neelameggham N.R., Hort N, eds (2012) TMS Magnesium Technology 2012, Orlando, FL, USA. Department of Mechanical, Automotive & Materials Engineering, University of Windsor, 401 Sunset Avenue, Windsor, Ontario, Canada N9B 3P4
Effects of Alloying Elements and Cooling Rate on Morphology of Phases in CaO Added Mg-Al-Si Alloys Y. Jung, H. Lim, Y. Yoon, S. Kim, and D. Kim Hort, N, Mathaudhu, SN, Neelameggham NR, Alderman, M, eds (2013) TMS Magnesium Technology 2013, San Antonio, TX, USA. Casting Research Center, Korea Institute of Industrial Technology, Incheon, Korea
Nanoparticle Addition to Enhance the Mechanical Response of Magnesium Alloys Including Nanoscale Deformation Mechanisms M. Paramsothy, and M. Gupta Hort, N, Mathaudhu, SN, Neelameggham NR, Alderman, M, eds (2013) TMS Magnesium Technology 2013, San Antonio, TX, USA. Department of Mechanical Engineering, National University of Singapore 9 Engineering Drive 1, Singapore 117576
Properties of Extruded Disintegrable Metal Composites B. Salinas, Z. Xu, and J. Welch Hort, N, Mathaudhu, SN, Neelameggham NR, Alderman, M, eds (2013) TMS Magnesium Technology 2013, San Antonio, TX, USA. Baker Hughes Incorporated; 14990 Yorktown Plaza Drive; Houston, TX, 77040, USA
Synthesis of Disintegrable Metal Composite for Oilfield Applications Z. Zhang, B. Salinas, C. Newman, and Z. Xu Hort, N, Mathaudhu, SN, Neelameggham NR, Alderman, M, eds (2013) TMS Magnesium Technology 2013, San Antonio, TX, USA. Baker Hughes Incorporated; 14990 Yorktown Plaza Drive; Houston, TX, 77040, US
Achieving Uniform Distribution and Dispersion of a High Percentage Nanoparticles in Mg18Sn Matrix by Solidification Processing Lian-Yi Chen, Jun-Yang Peng, Jia-QuanXu, Hongseok Choiand Xiao-Chun Li Alderman, M, Manuel, MV, Hort, N, Neelameggham, NR, eds (2014) TMS Magnesium Technology 2014, San Diego, CA, USA. Department of Mechanical Engineering, University of Wisconsin-Madison, Madison WI 53706, USA
Advanced Characterization of Metal Matrix Nano-Composites Mounib Maher, Lefebvre Williams Alderman, M, Manuel, MV, Hort, N, Neelameggham, NR, eds (2014) TMS Magnesium Technology 2014, San Diego, CA, USA. GPM (Groupe de Physique des Matériaux); Avenue de L’Université – BP12, 76801, Saint Etienne du Rouvray, France
An Insight into processing and Characteristics of Magnesium Based Composites Manoj Gupta, Wai Leong Eugene Wong Alderman, M, Manuel, MV, Hort, N, Neelameggham, NR, eds (2014) TMS Magnesium Technology 2014, San Diego, CA, USA. Department of Mechanical Engineering, National University of Singapore, 9 Engineering Drive 1, Singapore 117576
Ceramic Dispersions in Metal Castings Created by Direct Injection of a Liquid Organic Precursor into the Melt Sudarshan, Rishi Raj Alderman, M, Manuel, MV, Hort, N, Neelameggham, NR, eds (2014) TMS Magnesium Technology 2014, San Diego, CA, USA. University of Colorado; Department of Mechanical Engineering; 1111 Engineering Dr.; Boulder, CO 80309, USA
Effect of Nano-reinforcement on Properties of Cast Mg-Al Alloy AZ91 Mahmoud, M. G., El-Mahallawi, I.S., Rashad, R. M. Alderman, M, Manuel, MV, Hort, N, Neelameggham, NR, eds (2014) TMS Magnesium Technology 2014, San Diego, CA, USA. Faculty of Engineering, Cairo University, Gamaa Street, Giza 12613, Egypt
Enhancing Tensile and Compressive Strength of AZ41 Magnesium Alloy by Adding Nano-Sized Al2O3 Md Ershadul Alam, and Abdelmagid Salem Hamouda Alderman, M, Manuel, MV, Hort, N, Neelameggham, NR, eds (2014) TMS Magnesium Technology 2014, San Diego, CA, USA. Mechanical Engineering, HBCC, King Fahd University of Petroleum and Minerals, P.O. Box: 1803, KSA 31991
Fabrication and Tensile Properties of AL2O3 Particle and Fibre Hybrid Magnesium (AM60)-Based Composites Xuezhi Zhang, Qiang Zhang, Henry Hu, and Xueyuan Nie Alderman, M, Manuel, MV, Hort, N, Neelameggham, NR, eds (2014) TMS Magnesium Technology 2014, San Diego, CA, USA. Department of Mechanical, Automotive & Materials Engineering University of Windsor, Windsor, ON N9B 3P4, Canada
Hardening and Softening Processes in an AJ51 Magnesium Alloy Reinforced with Short Saffil Fibres Zuzanka Trojanová, Gergely Farkas, Kristián Máthis and Pavel Lukác Alderman, M, Manuel, MV, Hort, N, Neelameggham, NR, eds (2014) TMS Magnesium Technology 2014, San Diego, CA, USA. Department of Physics of Materials, Faculty of Mathematics and Physics, Charles University in Prague, Ke Karlovu 5, CZ-121 126 Praha 2, Czech Republic
Hot Extruded Carbon Nanotube Reinforced Magnesium Matrix Composites and it's Microstructure, Mechanical, and Corrosion Properties Harun Mindivan, Arife Efe, E.Sabri Kayali Alderman, M, Manuel, MV, Hort, N, Neelameggham, NR, eds (2014) TMS Magnesium Technology 2014, San Diego, CA, USA. Atatürk University, Department of Metallurgy and Materials Engineering,25240, Erzurum, TURKEY
Phase-Field Modeling of Solidification in Light-Metal Matrix Nanocomposites Tamás Pusztai, László Rátkai, Attila Szállás, László Gránásy Alderman, M, Manuel, MV, Hort, N, Neelameggham, NR, eds (2014) TMS Magnesium Technology 2014, San Diego, CA, USA. Wigner Research Centre for Physics, H-1525 Budapest, POB 49, Hungary
Effects of Ti and TiB2 Nanoparticulates on Room Temperature Mechanical Properties and in Vitro Degradation of Pure Mg Ganesh Kumar Meenashisundaram, Mui Hoon Nai and Manoj Gupta Manuel, MV; Sing, A; Alderman, M, Neelameggaham, NR, eds (2015) TMS Magnesium Technology 2015, Orlando, FL. Department of Mechanical Engineering, National University of Singapore,9 Engineering Drive 1,Singapore - 117576, Singapore
High Performance Mg6Zn Nanocomposites Fabricated Through Friction Stir Processing Jiaquan Xu, Chezheng Cao, Shamiparna Das, Lianyi Chen, Chao Ma, Rajiv S. Mishra, Xiaochun Li Manuel, MV; Sing, A; Alderman, M, Neelameggaham, NR, eds (2015) TMS Magnesium Technology 2015, Orlando, FL. Department of Materials Science and Engineering, University of California, Los Angeles, CA 90095, USA
Synthesis and Characterization of Novel Magnesium Materials Containing Copper-Titanium Based (Cu50Ti50) Amorphous Alloy Particles S. Sankaranarayanan, N. Agrawal, S. Jayalakshmi, Q.B. Nguyen, M. Gupta Manuel, MV; Sing, A; Alderman, M, Neelameggaham, NR, eds (2015) TMS Magnesium Technology 2015, Orlando, FL. Department of Mechanical Engineering, National University of Singapore, Singapore 117576
Non-destructive characterization of magnesium-based metal matrix composites subjected to thermal cycling Chmelik F., Lukac P., Kainer K.U., Langdon T.G. Mazal, P editor (2001), 31st International Conference, Defektoskopie Prag, Czech Republic. GKSS Research Centre Geesthacht, Germany
Effect of post heat treatment after squeeze casting on the micro-strain induced by thermal stress in the short fiber reinforced piston alloy Huang Y., Hort N., Kainer K. U. Librescu, L, Marzocca, P, eds (2003), Proceedings of the 5th International Congress on Thermal Stresses and Related Topics, Blacksburg, VA GKSS Research Centre Geesthacht, Germany
Anisotrophy of Dilatation Characteristics in Mg and Mg4Li Fibre Composites A. Rudajevová, P. Lukác Kainer, KU editor (2006) Magnesium: Proceedings of the 7th International Conference on Magnesium Alloys and Their Applications, 2006, DGM, Frankfurt, Germany. Charles University, Prague, Czech Republic
Grain Refinement of AZ31 by (SiC)p: Theoretical Calculation and Experiment R. Günther, Ch, Hartig, R. Bormann Kainer, KU editor (2006) Magnesium: Proceedings of the 7th International Conference on Magnesium Alloys and Their Applications, 2006, DGM, Frankfurt, Germany. Hamburg University of Technology, Hamburg, Germany
In mould heating of continuous carbon fibre preforms for reinforced high pressure die casting magnesium parts Oberschelp C., Klaus G., Bührig.Polacezek A., Werner J., Langkamp A., Hufenbach W., Hort N., Dieringa H., Kainer K.U. Kainer, KU editor (2006) Magnesium: Proceedings of the 7th International Conference on Magnesium Alloys and Their Applications, 2006, DGM, Frankfurt, Germany. GKSS Research Centre Geesthacht, Germany
Production of a Fine-grained Mg Alloy AZ31 with SiC Particles G. Vidrich, Y. Estrin, A. Schiffl, F. Pravdic, H. Kaufmann, H. Ferkel, N. Hort Kainer, KU editor (2006) Magnesium: Proceedings of the 7th International Conference on Magnesium Alloys and Their Applications, 2006, DGM, Frankfurt, Germany. Technische Universität Clausthal, Clausthal-Zellerfeld, Germany
Production of fine grained Mg alloy AZ31 with SiC particles Vidrich G., Estrin Y., Schiffl A., Pravdic F., Kaufmann H., Ferkel H., Hort N. Kainer, KU editor (2006) Magnesium: Proceedings of the 7th International Conference on Magnesium Alloys and Their Applications, 2006, DGM, Frankfurt, Germany. GKSS Research Centre Geesthacht, Germany
Development of a Full-Field Crystal Plasticity Model for Simulation of Plasdticity in Wrought Magnesium Alloys G. Garcés, M. Rodriguez, S. Agnew, J. Segurado Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. Department of Physical Metallurgy (CENIM-CSIC), Madrid, Spain
Effect of Cooling Rate on Morphology and Distribution of Precipitated Mg2Si Particles in Mg/Mg2Si Composite F. Mirshahi, M. Meratian, M. Panjepour Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. Isfahan University of Technology, Department of materials Engineering, Isfahan, Iran
Fabrication of Carbon Nanotube/Magnesiujm Alloy Coposites by Melt Stirring Q. Li, A. Viereckl, C. A. Rottmair, R.F. Singer Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. University of Erlangen-Nuremberg, Fuerth, Germany
Grain Refinement Mechanism of SiC in Mg-Al Alloys Yuanding Huang, N. Hort, Z. Zhen, Bin Liu, O. Anopuo, K.U. Kainer, Gyu Seok Kim Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. GKSS Research Centre Geesthacht, Germany
Grain Refinement of AZ91 with Hexagonal Boron Nitride B. Kujat, D. Bormann, A. Günther, F.-W. Bach Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. Institute of Materials Science, Leibniz University Hannover, Hannover, Germany
High Strength Mg-Zn-Y Alloys Produced by Powder Metallurgy: Unreinforced Alloys and their Composites G. Garcés, E. Mora, E. Ońorbe, P. Pérez, P. Adeva Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. Department of Physical Metallurgy (CENIM-CSIC), Madrid, Spain
Microstructural and Mechanical Properties of Mg Based Laminated Composites Fabricated by ECAE D. Wu, R.S. Chen, E.H. Han Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. Institute of metal Research Chinese Academy of Sciences, Chenyang, China
Microstructure of Magnesium Matrix Composite Reinforced with Glassy-Carbon Particles A. Olszówka-Myalska, J. Myalski Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. Silesian University of Technology, Katowice, Poland
Microstrutural and Mechanical Properties of Magnesium Matrix Composite Reinforced with Titanium Powders via Powder Metallurgy Process K. Kondoh, M. Kawakami, J. Umeda, H. Imai, H. Fujii Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. Osaka University, Osaka, Japan
Study of Residual Thermal Stresses in Magnesium-Based Composites Using Internal Friction Z. Trojanová, P. Lukác, O. Padalka, W. Reihemann Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. Department of Physics of Materials, Charles University, Prague, Czech Republic
Wear Resistance and Corrosion Behaviour of a Mg-AZ91E/TiC Composite B. B. Egberty, F.F. Lázaro. L.B. Carlos, L.R. José Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. UMSNH-IIM, Morelia Mich., Mexico
Crystal Structure Evolution of an OD Intermetallic Phase in the Mg-Al-Gd System K. Kishida, H. Yokobayashi, H. Inui, M. Yamasaki, Y. Kawamura Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. Kyoto University; Sakyo-ku; Kyoto, 606-8501, Japan
Friction Stir Processing of Magnesium Matrix Composites Reinforced With Carbon Fibres: Influence of the Matrix Characteristics and of the Processing Parameters on Microstructural Developments A. Mertens, A. Simar, H.-M. Montrieux, J. Halleux, F. Delannay and J. Lecomte-Beckers Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. Université de Ličge, Faculty of Applied Science, A&M Department, MMS Unit, Chemin des Chevreuils, 1 B52/3 B4000 Ličge, Belgium
Microstructure and Mechanical Characteristics of AZ41/1.5Al2O3 Magnesium Based Nanocomposite With 2 Wt. % Ca Addition M.E. Alam , R.A. Rima , A.M.S. Hamouda and M. Gupta Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. Department of Mechanical and Industrial Engineering, Qatar University, Doha, Qatar 2713
Microstructure and Mechanical Properties of AZ91E Alloy Modified by Ceramic Particles Dmitry Shepelev, Menachem Bamberger, Alex Katsman Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. Department of Materials Engineering, Israel Institute of Technology, Haifa 32000, Israel
Sliding Wear Behaviour of Mg Alloy (AM60) Reinforced with Different Volume Percentages of Al2O3 Fibres A. Banerji, H. Hu, A.T. Alpas Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. Department of Mechanical, Automotive & Materials Engineering, University of Windsor, 401 Sunset Avenue, Windsor, Ontario, Canada N9B 3P4
The Beneficial and Comparative Reinforcement of Hybrid Magnesium Alloys using Nitride Nanoparticles M Paramsothy, J Chan, R Kwok and M Gupta Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. Department of Mechanical Engineering, National University of Singapore9 Engineering Drive 1, Singapore 117576
Thermal and Microestructural Characterization of Mg-AZ91E/AlN Composites Manufactured by Liquid Metal Infiltration Egberto Bedolla, José Lemus-Ruiz, Antonio Contreras Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. Instituto de Investigaciones Metalúrgicas, Universidad Michoacana de San Nicolás de Hidalgo, Apdo. Postal 888, Morelia, Mich., C.P. 58000, MÉXICO
Thermal cycling of hybrid reinforced Magnesium based metal matrix composites Thakur S.K., Dhindaw B.K., Hort N., Kainer K.U. Hui, D editor (2002) Proceedings of the 9th International Conference on Composite Materials, San Diego, CA GKSS Research Centre Geesthacht, Germany
Microstructural investigation near the interfaces in the short fiber reinforced AlSi12CuMgNi composites Huang Y.D., Hort N., Dieringa H., Kainer K.U., Liu Y.L. Volume 53 GKSS Research Centre Geesthacht, Germany
Magnesium based MMCs reinforced with C-fibers Dieringa H., Hort N., Kainer K.U. Volume 6 GKSS Research Centre Geesthacht, Germany
Effect of particulate content on the thermal cycling behaviour of the magnesium alloy based hybrid composites Kumar S., Dieringa H., Kainer K.U. Volume 36 GKSS Research Centre Geesthacht, Germany
Thermal behavior of short fibre reinforced AlSil2CuMgNi piston alloys Huang Y.D., Hort N., Kainer K.U. Volume 35 GKSS Research Centre Geesthacht, Germany
Analysis of thermal cycling curves of short fibre reinforced Mg-MMCs Kumar S., Ingole S., Dieringa H., Kainer K.U. Volume 63 GKSS Research Centre Geesthacht, Germany
Analysing hysteresis and residual strains in thermal cycling curves of Mg-MMCs Kumar S., Mondal A., Dieringa H., Kainer K.U. Volume 64 GKSS Research Centre Geesthacht, Germany
Analysis of instantaneous thermal expansion coefficient curve during thermal cycling in short fiber reinforced AlSi12CuMgNi composites Huang Y.D., Hort N., Dieringa H., Kainer K.U. Volume 65 GKSS Research Centre Geesthacht, Germany
Magnesium Matrix Composites Hort N., Dieringa H., Thakur S. K., Kainer K. U. Mordike, BL, Friedrich, H, eds (2006), Magnesium Technology: Metallurgy, Design Data, Applications GKSS Research Centre Geesthacht, Germany
Mg-6Zn/1.5%SiC Nanocomposites Fabricated by Ultrasonic Cavitation Based Solidification Processing Cao G., Choi H., Oportus J., Konishi H., Kou S., Lakes R., Li X. Volume 291 Department of Mechanical Engineering, University of Wisconsin-Madison, WI; Department of Materials Science and Engineering, University of Wisconsin-Madison, WI; Department of Applied Physics, University of Wisconsin-Madison, WI
The Role of Solutes for Grain Refinement by (SiC)p: Experiment and Theoretical Calculation Günther R., Hartig C., Anopuo O., Hort N., Bormann R. Volume 291 Institute of Materials Science and Technology, Hamburg University of Technology, Germany; Magnesium Innovation Centre MagIC, GKSS Research Centre, Germany
Tensile and compressive creep behaviour of Al2O3 (Saffil) short fiber reinforced magnesium alloy AE42 Dieringa H., Huang Y.D., Maier P., Hort N., Kainer K.U. Volume 399, 410-411 GKSS Research Centre Geesthacht, Germany
Thermal cycling behaviour of the magnesium alloy based hybrid composites in the transverse direction Kumar S., Dieringa H., Kainer K.U. Volumes 444, 454-455, 460-461, 462 GKSS Research Centre Geesthacht, Germany
Some studies on Mg alloy reinforced with ceramic discontinuous phases Thakur S.K., Dhindaw B.K., Hort N., Kainer K.U. Volume 419-422, 426-432 GKSS Research Centre Geesthacht, Germany
Thermal cycling of Mg-MMCs Kumar S., Ingole S., Dieringa H., Kainer K.U. Volume 419-422, 426-432 GKSS Research Centre Geesthacht, Germany
Basics of Metal Matrix Composites Kainer K.U. Kainer, KU editor (2006), Metal Matrix Composites GKSS Research Centre Geesthacht, Germany
Particles, Fibres and short Fibres for the reinforcement of metal materials Dieringa H., Kainer K.U. Kainer, KU editor (2006), Metal Matrix Composites GKSS Research Centre Geesthacht, Germany
Powder metallurgically manufactured metal matrix composites Hort N., Kainer K.U. Kainer, KU editor (2006), Metal Matrix Composites GKSS Research Centre Geesthacht, Germany
Some studies on the thermal-expansion behaviour of C-fiber, SiCp, and In-Situ Mg2Si-reinforced AZ31 Mg Alloy-based hybrid composites Thakur S., Dhindaw B.K., Hort N., Kainer K.U. Volume 35 GKSS Research Centre Geesthacht, Germany
Microstructure characterization and creep properties of AE42 based hybrid composites prepared by squeeze casting process Arunachaleswaran A., Dhindaw B.K., Dieringa H., Hort N., Kainer K.U. Volume 60 GKSS Research Centre Geesthacht, Germany

Magnesium R&D Technology