Skip to Main Content U.S. Department of Energy
Magnesium - Deformation
Title Author Reference Affiliation
Deformation Behaviour of a Mg-Al-Zn Alloy at High Strain Rates E.A. El-Magd, & H.P. Weisshaupt Mordike, BL, Kainer, KU eds (1998) Magnesium Alloys and their Applications, Hamburg, Germany, Werkstoff-informations gesellshaft. Rheinisch-Westfalische Technische Hochschule Aachen (D) & Conti Tech Formteile GmbH, Koln (D)
Deformation Behaviour of AZ Alloys at High Strain Rates K.U. Kainer, Technische Universitat Clausthal, Clausthal-Zellerfeld (D); E. Lach, Deutsch-Franzosisches Forschungsinstitut, Saint-Louis (F) Mordike, BL, Kainer, KU eds (1998) Magnesium Alloys and their Applications, Hamburg, Germany, Werkstoff-informations gesellshaft. Technische Universitat Clausthal, Clausthal-Zellerfeld (D) & Deutsch-Franzosisches Forschungsinstitut, Saint-Louis (F)
Deformation Twinning of AZ31 Alloy in Quasistatic and Dynamic Compression Tests Lach E., Kainer K.U., Bohmann A., Scharf M. Mordike, BL, Kainer, KU, eds (2000) Magnesium Alloys and their Applications, Munich, Germany GKSS Research Centre Geesthacht, Germany
Low Temperature Super-Plasticity Response of AZ31B Magnesium Alloy with Severe Plastic Deformation A. Ben-Artzy, A. Shtechman, A. Bussiba, Y. Salah, S. Ifergan, M. Kupec and R. Grinfeld Kaplan, HI editor (2003) Magnesium Technology 2003, TMS, Warrendale, PA Rotem industries LTD, ISRAEL & Ben-Gurion University,ISRAEL
Influence of Thermoplastic ECAP on Mechanical Properties and Microstructures of an AZ61A Magnesium Alloy Y. Yinbiao, S. Guoyuan, W. Bing and H. Yinghan Luo, AA, editor (2004) Magnesium Technology 2004, TMS, Warrendale, PA Nanjing University of Science & Technology, CHINA
TEM Investigation of Dislocation Mechanisms in Mg Alloy AZ31B Sheet S.R. Agnew and O. Duygulu Luo, AA, editor (2004) Magnesium Technology 2004, TMS, Warrendale, PA University of Virginia
Cyclic Deformation Behavior Of Newly Developed Microalloyed Mg Wrought Alloys In Corrosive Environment Fleck C., Löhe D. Beals, RS, Luo, AA, Neelameggham, NR, Pekguleryuz, MO, eds (2007) Magnesium Technology 2007, Orlando, FL Fachgebiet Werkstofftechnik; Technische Universität Berlin
Deformation Behavior Of Ecaped AZ31 Mg Alloy at Low Homologous Temperatures Lee H. S., Kim D. W., Bang W., Chang Y. W. Beals, RS, Luo, AA, Neelameggham, NR, Pekguleryuz, MO, eds (2007) Magnesium Technology 2007, Orlando, FL Pohang University of Science and Technology
Development of Magnesium Sheetmetal Forming Parts for Electronic Appliances: Case Studies Bang W., Sung H.J., Kim I.J., Choo D., Park W.-J., Jung I.H., Ahn S. Beals, RS, Luo, AA, Neelameggham, NR, Pekguleryuz, MO, eds (2007) Magnesium Technology 2007, Orlando, FL RIST (Research Institute of Industrial Science and Technology)
Hot Deformation Mechanisms In Mg-x%Al -1%Zn -y%Mn Alloys Seale G., Carter J., Verma R., Krajewski P., Essadiqi E., Javaid A., Galvani C., Zarandi F., Yue S. Beals, RS, Luo, AA, Neelameggham, NR, Pekguleryuz, MO, eds (2007) Magnesium Technology 2007, Orlando, FL Department of Mining, Metals and Materials Engineering, McGill University
Initial Ballistic Evaluation of The Magnesium Alloy AZ31B Jones T. L., DeLorme R. D., Burkins M. S., Gooch W. A. Beals, RS, Luo, AA, Neelameggham, NR, Pekguleryuz, MO, eds (2007) Magnesium Technology 2007, Orlando, FL US Army Research Laboratory
Numerical Modelling Of Large Strain Deformation In Magnesium Alloy AM30 Lévesque J., Inal K., Neale K. W., Mishra R. K., Luo A. A., Jiang L. Beals, RS, Luo, AA, Neelameggham, NR, Pekguleryuz, MO, eds (2007) Magnesium Technology 2007, Orlando, FL Department of Civil Engineering, University of Sherbrooke
Prediction of Variability in Mechanical Properties based on Microstructural Simulations and Finite Elements Based Computations Lee S. G., Sreeranganathan A., Gokhale A. M. Beals, RS, Luo, AA, Neelameggham, NR, Pekguleryuz, MO, eds (2007) Magnesium Technology 2007, Orlando, FL School of Materials Science and Engineering, Georgia Institute of Technology
Study of Texture Evolution During Channel-Die Compression of Mg-Al Alloys by In-Situ Neutron Diffraction Sediako D.G., Gharghouri M.A., Rogge R.B., Watson M.J. Beals, RS, Luo, AA, Neelameggham, NR, Pekguleryuz, MO, eds (2007) Magnesium Technology 2007, Orlando, FL Canadian Neutron Beam Centre
Texture Evolution in AM30 Mg Alloy Deformed along Different Strain Paths Jiang L., Jonas J.J., Mishra R., Luo A.A., Sachdev A.K., Godet S. Beals, RS, Luo, AA, Neelameggham, NR, Pekguleryuz, MO, eds (2007) Magnesium Technology 2007, Orlando, FL McGill University, Dept. of Materials Engrg
The Influence of Grain Size on Yielding Asymmetry of Extruded AZ31 Magnesium Alloy Wang J. T., Yin D. L., Zhu X. R., Wang R., Zhao X. Beals, RS, Luo, AA, Neelameggham, NR, Pekguleryuz, MO, eds (2007) Magnesium Technology 2007, Orlando, FL Department of Materials Science and Engineering, Nanjing University of Science and Technology
The Role of Texture in Yielding Asymmetry of Extruded AZ31 Magnesium Alloy Yin D. L., Wang J. T., Zhu X. R., Wang R., Zhao X. Beals, RS, Luo, AA, Neelameggham, NR, Pekguleryuz, MO, eds (2007) Magnesium Technology 2007, Orlando, FL Department of Materials Science and Engineering, Nanjing University of Science and Technology
Twinning And Ductile Failure Of Mg-3Al-1Zn Barnett M.R. Beals, RS, Luo, AA, Neelameggham, NR, Pekguleryuz, MO, eds (2007) Magnesium Technology 2007, Orlando, FL Centre for Material and Fibre Innovation, Australia
Analysis of Magnesium Alloy AZ31B-H24 for Ballistic Applications Tyrone Jones, Matthew Burkins, and William Gooch Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA U.S. Army Research Laboratory, Weapons and Materials Research Directorate, Aberdeen, Maryland
Constitutive Behavior of Four Wrought Magnesium Alloys under Warm Forming Conditions Sean Agnew, Cyrus E. Dreyer, John F. Polesak III, William V. Chiu, C. John Neil, and Marcos Rodriguez Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA University of Virginia, Charlottesville, Virginia
Deformation Mechanisms of AZ31 Magnesium Alloy Timo Ebeling, Christian Hartig, Torsten Laser, and Rüdiger Bormann Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA Hamburg University of Technology, Inst. of Materials Science and Technology, Hamburg, Germany
Development of a Strip-Rolling Technology for Mg Alloys Based on the Twin-Roll- Casting Process Rudolf Kawalla, Matthias Oswald, Christian Schmidt, Madlen Ullmann, Hans-Peter Vogt, and Nguyen Duc Cuong Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA Freiberg University of Mining and Technology, Freiberg, Germany
Effect of {10-11} Contraction and {10-11}-{10-12} Double Twins on the Subsequent Deformation Behavior of Two Mg Alloys Lan Jiang, John J Jonas, and Raj Mishra Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA McGill University, Dept. of Materials Engrg., Montreal, Quebec, Canada
Effect of Coiling on Hot Bulge Testing of AZ31 Magnesium Sheet Jon Carter Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA General Motors R&D Center, Warren, Michigan
Effect of Twinning on the Mechanical Behavior in Mg-Zn-Y Alloys Ju Youn Lee, Hyun Kyu Lim, Do Hyung Kim, Won Tae Kim, and Do Hyang Kim Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA Center for Noncrystalline Materials, Dept. of Metallurgical Eng. Yonsei Univereity, Seoul, Korea
Elastic Constants of Magnesium Compounds from First-Principles Calculations Swetha Ganeshan, Hui Zhang, Shunli L Shang, Yi Wang, and Zi-Kui Liu Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA Pennsylvania State University, University Park, Pennsylvania
Finite Element Modeling of the Thermo-Mechanical Behavior of an AZ31 Magnesium Alloy during Hot Rolling Fady Elsayed, Hany Ahmed, Mary Wells, Gary Lockhart, and Daan Maijer Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA Department of Materials Science, German University, Cairo, Egypt
Flow Stress Modelling of Magnesium AZ31 Alloy Based on High Strain Plane Strain Compression Data Rahul Bhattacharya, Brad Wynne, Mark Rainforth, and Bruce Davies Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA The University of Sheffield (IMMPETUS), Sheffield, United Kingdom
Forming Characteristics of Mg Sheet with Variation of Temperatur Yong Nam Kwon, Young Seon Lee, and Jung Hwan Lee Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA Korea Institute of Materials Science, Changwon, Korea
Fracture Toughness in Magnesium Alloys by Dispersion of Quasicrystalline Phase Hidetoshi Somekawa, Alok Singh, and Toshiji Mukai Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA Structural Metals Center, National Institute for Materials Science, Tsukuba, Japan
Influence of Cerium on Texture and Ductility of Magnesium Alloy Extrusions Raja K. Mishra, Anil K. Gupta, P. Rama Rao, Anil K. Sachdev, Arun M. Kumar, and Alan A. Luo Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA General Motors R&D Center, Warren, Michigan
Investigating the Effect of Strain Rate and Temperature on the Deformability and Microstructure Evolution of AZ31 Magnesium Alloy Ismael Abdel Maksoud, Hany Ahmed, and Johannes Rödel Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA Department of Materials Science, German University, Cairo, Egypt
Microstructure and Bendability of AM60 and AZ61 Magnesium Alloy Tubes Yingxin Wang, Li Jin, Xiaoqin Zeng, Wenjiang Ding, Alan A. Luo, Anil K. Sachdev, and Raj Mishra Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA National Engineering Research Center of Light Alloys Net Forming, State Key Laboratory of Metal Matrix Composite School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai, China
Study of Deformation Modes in AZ80 Magnesium Alloy Jayant Jain, Warren J. Poole, and Chad W. Sinclair Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA University of British Columbia, Vancouver B.C., Canada
The Flow Stress during Hot Compression Deformation of a Mg-Gd-Y-Zr Magnesium Alloy: Experiments and Numerical Simulations Xinping Zhang, and J. T. Wang Pekguleryuz M.O., Neelameggham N.R., Beals R.S., Nyberg E.A., eds (2008) TMS Magnesium Technology 2008, New Orleans, LA Nanjing University of Science and Technology, Nanjing, China
A Comparative Study on Deformation Behaviors of Two Lightweight Alloys: Magnesium and Titanium, and Their Potential Applications Wu X., Yuan Q., Liu Y., Huang Z. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. Mechanical Engineering, Wayne State University
A Constitutive Description for Drawing Limit of Magnesium Alloy Tube Based on Continuum Damage Mechanics Guozheng Q., Bin C., Jie Z., Ying T. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. Department of Mechanical Engineering, Chongqing university
An Upper-bound Analysis for Change-channel Angular Extrusion Liu T., Liu Y., Lu L., Pan F. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. Chongqing University
Anisotropic Plastic Deformation Behavior of As-extruded ZK60 Magnesium Alloy at Room Temperature Jinbao L., Qudong W., Liming P. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. National Engineering Research Center for Light Alloy Net Forming, Shanghai Jiao Tong University
Comparison Between ZM21 and ZME210 with Different Hot Extrusion Ratio Peng J., Song C., Pan F. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. College of Materials, Chongqing University
Comparison of Hot-deformation Behaviors of AZ31 with Different Initial States Wang B., Xin R., Huang G., Chen X., Liu Q. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. College of Material Science and Engineering, Chongqing University
Damage Evolution Equation of AZ31B Magnesium Alloy during Superplastic Deformation Song M., Wang L., Liu R. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. Chongqing University of Science and Technology
Deformation Behavior and Dynamic Recrystallization of As-cast Mg-Y-Nd-Gd-Zr Alloy: A Study With Processing Map Zhao X., Zhang K., Li X.-G., Li Y.-J., He Q.-K., Sun J.-F. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. State Key Laboratory for Fabrication and Processing, Non-Ferrous Metals General Research Institute for Non-ferrous Metals
Effect and Analysis on Microstructure and Mechanical Properties of MB2 Magnesium Alloy Severely Deformed by Accumulative Roll Bonding (ARB). Zhang B., Yuan Q. S. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. School of Material Science And Engineering, Xi'an University of Architecture & Technology
Effect of Deformation Twining on Annealing Behavior of AZ31 Mg Alloy Liu T., Hu W., Liu Q. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. Chongqing University
Effect of Microstructure on the Room Temperature Formability of Mg Alloys Kang D.H., Kim S., Bae G.T., Kim K.-H., Bae J.H., Kim N.J. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. Center for Advanced Aerospace Materials, POSTECH
Effect of Strain Ratio, Strain Rate and Initial Strain Direction on the Fatigue Behavior of AZ31 Wrought Magnesium Alloy Begum S., Chen D., Xu S., Luo A. A. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. Department of Mechanical and Industrial Engineering, Ryerson University
Examination of Dynamic Recrystallization during Compression of AZ31 Sheet Xin R., Wang B., Chen X., Huang G., Liu Q. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. College of Material Science and Engineering, Chongqing University
Failure Initiation and Propagation in AZ31 Magnesium Alloys Koike J., Ando D. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. Dept of Materials Science, Tohoku University
Finite Element Simulation of Effect of Radial Compression Ratio on the Microstructure and Surface Roughness of Rotary Swaged Magnesium Rong Li., Nie Z.R., Zuo T.Y. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. college of materials science and engineering, Beijing University Of Technology
Formability Evaluation of AZ31 Magnesium Alloy Tube at Elevated Temperature He Z., Yuan S., Wu J. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. Harbin Institute of Technology
Hot Deformation Behavior and Microstructure Evolution of Twin-roll-cast AZ31 Alloy: A Study with Processing Map Peng W., Li P., Zeng P., Lei L. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. Department of Mechanical Engineering, Tsinghua university
Investigation on Expansion Formability for AZ80 Magnesium Alloy Zhang Z.-M., Wang Q., Zhang B.-H., Xue Y. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. College of Materials Science&Engineering, North University of China
Isothermal Deformation Behavior of MB15 in Micro-forming of Micro-gear Wang C., Zhou J., Shan D., Guo B. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. School of Materials Science and Technology, Harbin Institute of Technology
Manufacturing Processes for Magnesium Alloys Hort N., Kainer K. U. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. MagIC - Magnesium Innovation Centre, GKSS Research Centre, Geesthacht, German
Microstructure and Texture Evolution during Warm Compression of the Magnesium Alloy AZ31 Jiang J., Godfrey A., Liu Q. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. Laboratory of Advanced Materials, Dept of Materials Science and Engineering, Tsinghua University
Microstructure and Texture Evolution of AZ31 Magnesium Alloy during Rolling Huang G., Liu Q., Xin R., Chen X., Wang L. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. College of Material Science and Engineering, Chongqing University
Microstructure Changes of as-cast Mg-Al-Ca Alloys with High Temperature Deformation Xu S., Matumoto N., Ogawa K., Yamamoto K., Kamado S., Homa R., Kojima Y. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. Department of Mechanical Engineering, Nagaoka University of Technology
Microstructures and Mechanical Properties of Rare Earth Magnesium Alloy Machined Chips Recycled by Severe Plastic Deformation Peng T., Wang Q. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. School of materials Science and engineering, Shanghai Jiao Tong University
Optimal Process Exploration of Repeatedly Unidirectional Bending on Cold Rolled Magnesium Alloy Sheet Huang G., Xu W., Huang G., Li H., Pan F. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. College of Materials Science and Technology, Chongqing University
Preparation of Semi-solid Billet of ZW61 Alloy by Equal Channel Angular Extrusion Huang Z., Chen R., Han E. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. Environmental Corrosion Center, Institute of Metal Research, Chinese Academy of Sciences
Research of Deformation Characteristics in Polycrystalline AZ31 Magnesium Alloy at Moderate Temperatures Liu J., Chen D., Chen Z., Yan H., Jiang Z. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. School of Materials Science and Engineering, Hunan University
Research on Property of Mg-4Y-Mn and Mg-3Nd-Y-Mn Deformation Alloys Fang D.-Q., Meng J., Jiang J.-H., Li R.-G. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. Key Laboratory of Automobile Materials of Ministry of Education and Department of Materials Science and Engineering , Jilin University
Research on Super Plasticity of Mg-Li Alloys Ji H. B., Yao G. C. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. Northeastern University
Superplasticity of Hot-rolled Mg-5.8Zn-1Y-0.48Zr Magnesium Alloy Sheet Yan H., Chen R., Han E. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. Environmental Corrosion Center, Institute of Metal Research, Chinese Academy of Sciences
The Effect of Hot Deformation on Microstructure and Properties of MgZnYZr Wrought Alloy Wei T., Rongshi C., Enhou H., Lu L., Yongbo X. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. Institute of Metal Research
The Hot Deformation Behavior and Structure Analysis of as-cast Mg-7Gd-5Y-1.2Nd-Zr Magnesium Alloy without Pre-homogenization Treatment Ma M., Zhang K., Li X., Li Y., Xu Y., Zhao X., Zhang K., Zhang K., Mi X., Xiong B. Luo A.A., Pan F., Kainer K.U., eds (2008) Materials Research 2008, Chongqing, China. State Key Lab for Fabrication & Processing of Non-ferrous Metals, General Research Institute for Non-ferrous Metal
A New Approach for Inverse Parameter Calculations of the Plastic Deformation Behavior of AZ31 Magnesium Alloy T. Ebeling, C. Hartig, and R. Bormann Nyberg E.A., Agnew S.R., Neelameggham N.R., Pekguleryuz M.O., eds (2009) TMS Magnesium Technology 2009, San Francisco, CA Hamburg University of Technology, Inst. of Materials Science and Technology, Hamburg, Germany
Application of Incremental Forming Technique to Mg-AZ31 Sheet J. Park Nyberg E.A., Agnew S.R., Neelameggham N.R., Pekguleryuz M.O., eds (2009) TMS Magnesium Technology 2009, San Francisco, CA Hongik University, Seoul, Korea
Application of Neutron Diffraction in In-Situ Studies of Stress Evolution in High Temperature Creep Testing of Creep Resistant Magnesium Alloys D. Sediako Nyberg E.A., Agnew S.R., Neelameggham N.R., Pekguleryuz M.O., eds (2009) TMS Magnesium Technology 2009, San Francisco, CA Canadian Neutron Beam Centre, Ontario, Canada
Blind Study of the Effect of Processing History on the Constitutive Behavior of Alloy AZ31B C. Dreyer, F. Polesak, T. Shultz, and S. Agnew Nyberg E.A., Agnew S.R., Neelameggham N.R., Pekguleryuz M.O., eds (2009) TMS Magnesium Technology 2009, San Francisco, CA University of Virginia, Charlottesville, Virginia
Deformation Mechanisms in AZ31 Magnesium Alloy Tube Bending L. Jin, W. Wu, R. Mishra, A. Luo, A. Sachdev, and S. Yao Nyberg E.A., Agnew S.R., Neelameggham N.R., Pekguleryuz M.O., eds (2009) TMS Magnesium Technology 2009, San Francisco, CA Shanghai Jiao Tong University, Shanghai, China
Deformation Mechanisms in Magnesium Alloy Elektron 675 D. Randman, W. Rainforth, B. Wynne, and B. Davis Nyberg E.A., Agnew S.R., Neelameggham N.R., Pekguleryuz M.O., eds (2009) TMS Magnesium Technology 2009, San Francisco, CA IMMPETUS; Department of Engineering Materials; University of Sheffield, Sheffield, United Kingdom
Effect of Precipitates on Deformation Mechanisms at Low-Temperature in an AZ80 Magnesium Alloy J. Jain, J. Zou, W. Poole, and C. Sinclair Nyberg E.A., Agnew S.R., Neelameggham N.R., Pekguleryuz M.O., eds (2009) TMS Magnesium Technology 2009, San Francisco, CA The University of British Columbia, Vancouver B. C., Canada
Formability of Magnesium Sheet D. Letzig, L. Fuskova, K. Hantzsche, G. Kurz, S. Yi, and J. Bohlen Nyberg E.A., Agnew S.R., Neelameggham N.R., Pekguleryuz M.O., eds (2009) TMS Magnesium Technology 2009, San Francisco, CA GKSS Research Centre Geesthacht, Germany
Influence of Stress Ratio on Fatigue Crack Propagation Behavior of AZ31 Alloy K. Song, H. Jung, and K. Shin Nyberg E.A., Agnew S.R., Neelameggham N.R., Pekguleryuz M.O., eds (2009) TMS Magnesium Technology 2009, San Francisco, CA Seoul National University, Seoul, Korea
Influences of Load Direction and Grain Size on Tension-Compression Yield Asymmetry of Extruded AZ31 Magnesium Alloy D. Yin, and J. Wang Nyberg E.A., Agnew S.R., Neelameggham N.R., Pekguleryuz M.O., eds (2009) TMS Magnesium Technology 2009, San Francisco, CA Nanjing University of Science and Technology Nanjing, China
Microstructural Investigation of Twins under the Fracture Surface in AZ31 Mg Alloys D. Ando, and J. Koike Nyberg E.A., Agnew S.R., Neelameggham N.R., Pekguleryuz M.O., eds (2009) TMS Magnesium Technology 2009, San Francisco, CA Tohoku University, Sendai, Japan
On the Microstructure and Texture Development of Magnesium Alloy ZEK100 During Rolling J. Wendt, K. Kainer, G. Arruebarrena, K. Hantzsche, J. Bohlen, and D. Letzig Nyberg E.A., Agnew S.R., Neelameggham N.R., Pekguleryuz M.O., eds (2009) TMS Magnesium Technology 2009, San Francisco, CA Hamburg University of Technology, Inst. of Materials Science and Technology, Hamburg, Germany
Relation between the Microstructure and the Plastic Deformation Behavior in Mg12ZnY with the LPSO Structure K. Hagihara, A. Kinoshita, Y. Sugino, N. Yokotani, M. Yamasaki, Y. Kawamura, and Y. Umakoshi Nyberg E.A., Agnew S.R., Neelameggham N.R., Pekguleryuz M.O., eds (2009) TMS Magnesium Technology 2009, San Francisco, CA Graduate School of Engineering, Osaka University, Osaka Japan
Test Results and FEA Predictions from Magnesium AM30 Extruded Beams in Bending and Axial Compression D. Wagner, S. Logan, K. Wang, T. Skszek, and C. Salisbury Nyberg E.A., Agnew S.R., Neelameggham N.R., Pekguleryuz M.O., eds (2009) TMS Magnesium Technology 2009, San Francisco, CA Ford Motor Company; Dearborn, Michigan
Texture Evolution in an AZ31 Mg alloy during Direct and Indirect Extrusion Processes S. Choi, H. Lee, D. Kim, D. Yoon, S. Park, and B. You Nyberg E.A., Agnew S.R., Neelameggham N.R., Pekguleryuz M.O., eds (2009) TMS Magnesium Technology 2009, San Francisco, CA Sunchon National University, Sunchon, Korea
The Fracture Behavior of the B2 Intermetallic, MgY R. Mulay, J. Wollmershauser, and S. Agnew Nyberg E.A., Agnew S.R., Neelameggham N.R., Pekguleryuz M.O., eds (2009) TMS Magnesium Technology 2009, San Francisco, CA University of Virginia, Charlottesville, Virginia
Assessing and Modeling the Impact of Initial Microstructure on Dynamic Recrystallization of Sheets F. Polesak, P. Krajewski, B. Raeisinia, and S. Agnew Agnew S.R., Neelameggham N.R., Nyberg E.A., Sillekens W.H. eds (2010) TMS Magnesium Technology 2010, Seattle, WA University of Virginia, Charlottesville, Virginia
Atomistic Simulation of Grain Boundary Sliding in Mg during High Temperature Deformation H. Zhang Agnew S.R., Neelameggham N.R., Nyberg E.A., Sillekens W.H. eds (2010) TMS Magnesium Technology 2010, Seattle, WA Department of Chemical and Materials Engineering, University of Alberta, Alberta, Canada
Dynamic Blankholder Control for the Enhanced Forming Limit of Magnesium Sheets W. Bang Agnew S.R., Neelameggham N.R., Nyberg E.A., Sillekens W.H. eds (2010) TMS Magnesium Technology 2010, Seattle, WA RIST (Research Inst. of Industrial Sci. & Tech), Pohang, South Korea
Experimental and Computational Simulation of the Post-Warm Forming Constitutive Behavior of AZ31 F. Polesak, B. Raeisinia, and S. Agnew Agnew S.R., Neelameggham N.R., Nyberg E.A., Sillekens W.H. eds (2010) TMS Magnesium Technology 2010, Seattle, WA University of Virginia, Charlottesville, Virginia
Formability of Mg Alloys at Room Temperature D. Kim, D. Kang, S. Kim, G. Bae, K. Kim, and N. Kim Agnew S.R., Neelameggham N.R., Nyberg E.A., Sillekens W.H. eds (2010) TMS Magnesium Technology 2010, Seattle, WA McGill University, Montreal, Canada
Grain Size Effect on the Dome-Forming Limit and Deformation Mechanism of AZ31B Magnesium Alloy Sheets H. Kim, W. Bang, and Y. Chang Agnew S.R., Neelameggham N.R., Nyberg E.A., Sillekens W.H. eds (2010) TMS Magnesium Technology 2010, Seattle, WA POSTECH, Pohang, Korea
Implementation of the Anisotropy of Plastic Flow in Inverse Parameter Calculations of the Deformation Behavior of AZ31 Magnesium Alloy T. Ebeling, C. Hartig, and R. Bormann Agnew S.R., Neelameggham N.R., Nyberg E.A., Sillekens W.H. eds (2010) TMS Magnesium Technology 2010, Seattle, WA Hamburg University of Technology, Inst. of Materials Science and Technology, Hamburg, Germany
Importance of Crystallographic Texture of AZ31B on Flow Stress Anisotropy and Tension-Compression Asymmetry M. Al-Maharbi, D. Floey, I. Karaman, I. Beyerlein, T. Hartwig, L. Kecskes, and S. Mathaudhu Agnew S.R., Neelameggham N.R., Nyberg E.A., Sillekens W.H. eds (2010) TMS Magnesium Technology 2010, Seattle, WA Texas A&M University, College Station, Texas
Influence of Deformation Processing on the Tensile/Compressive Asymmetry in Wrought Mg-3Al-Zn Alloy R. Liu, D. Yin, and J. Wang Agnew S.R., Neelameggham N.R., Nyberg E.A., Sillekens W.H. eds (2010) TMS Magnesium Technology 2010, Seattle, WA Nanjing University of Science and Technology, Nanjing, China
Mechanical Behavior of AZ31 Due to Texture and Microstructure D. Foley, M. Al-Maharbi, K. Hartwig, I. Karaman, L. Kecskes, and S. Mathaudhu Agnew S.R., Neelameggham N.R., Nyberg E.A., Sillekens W.H. eds (2010) TMS Magnesium Technology 2010, Seattle, WA Texas A&M University, College Station, Texas
Plasticity in a Rod-Textured Extruded Mg AM30 Alloy Q. Ma, and H. ElKadiri Agnew S.R., Neelameggham N.R., Nyberg E.A., Sillekens W.H. eds (2010) TMS Magnesium Technology 2010, Seattle, WA Mississippi State University, Starkville, Mississippi
The Evolution of In-Grain Misorientation Axes (IGMA) During Deformation of Wrought Magnesium Alloy AZ31 Y. Chun, and C. Davies Agnew S.R., Neelameggham N.R., Nyberg E.A., Sillekens W.H. eds (2010) TMS Magnesium Technology 2010, Seattle, WA Monash University, Victoria, Australia
The Relationships between Grain Boundary Sliding and Grain Orientation in AZ31 Magnesium Alloys at Room Temperature D. Ando, Y. Sutou, and J. Koike Agnew S.R., Neelameggham N.R., Nyberg E.A., Sillekens W.H. eds (2010) TMS Magnesium Technology 2010, Seattle, WA Tohoku University, Sendai, Japan
Transmutation and Accommodation Effects by Glide Twinning A. Oppedal, and H. ElKadiri Agnew S.R., Neelameggham N.R., Nyberg E.A., Sillekens W.H. eds (2010) TMS Magnesium Technology 2010, Seattle, WA University, Mississippi State, Mississippi
Transmutation and Accommodation Effects by Glide Twinning A. Oppedal, and H. ElKadiri Agnew S.R., Neelameggham N.R., Nyberg E.A., Sillekens W.H. eds (2010) TMS Magnesium Technology 2010, Seattle, WA University, Mississippi State, Mississippi
Very High Strain Rate Deformation of AZ31b Mg Alloys Using Split Hopkinson Pressure Bar M. Sanjari, A. Farzadfar, S. Yue, and E. Essadiqi Agnew S.R., Neelameggham N.R., Nyberg E.A., Sillekens W.H. eds (2010) TMS Magnesium Technology 2010, Seattle, WA McGill University, Montreal, Canada
Compressive Strength and Hot Deformation Behavior of TX32 Magnesium Alloy with 0.4% Al and 0.4% Si Additions K. Rao, Y. Prasad, K. Suresh, C. Dharmendra, N. Hort, and K. Kainer Sillekens, WH, Agnew S.R., Neelameggham NR, Mathaudhu, SN, eds (2011) TMS Magnesium Technology 2011, San Diego, CA, USA. Department of Manufacturing Engineering and Engineering Management City University of Hong Kong, 83 Tat Chee Avenue Kowloon, Hong Kong SAR, China
Crystal Plasticity Modeling of Pure Magnesium Considering Volume Fraction of Deformation Twinning Y. Tadano Sillekens, WH, Agnew S.R., Neelameggham NR, Mathaudhu, SN, eds (2011) TMS Magnesium Technology 2011, San Diego, CA, USA. Saga University; 1 Honjo-machi; Saga 840-8502, Japan
Deformation Behavior of a Friction Stir Processed Mg Alloy Q. Yang, S. Mironov, Y. Sato, and K. Okamoto Sillekens, WH, Agnew S.R., Neelameggham NR, Mathaudhu, SN, eds (2011) TMS Magnesium Technology 2011, San Diego, CA, USA. Research and Development Division, Hitachi America, Ltd., Farmington Hills, MI 48335, USA
Deformation Behavior of Mg from Micromechanics to Engineering Applications E. Lilleodden, J. Mosler, M. Homayonifar, M. Nebebe, G. Kim, and N. Huber Sillekens, WH, Agnew S.R., Neelameggham NR, Mathaudhu, SN, eds (2011) TMS Magnesium Technology 2011, San Diego, CA, USA. Institute of Materials Research, Materials Mechanics, Helmholtz-Zentrum Geesthacht, Max-Planck-Str. 1, 21502 Geesthacht, Germany
Effect of Substituted Aluminum in Magnesium Tension Twin K. Solanki, A. Moitra, and M. Bhatia Sillekens, WH, Agnew S.R., Neelameggham NR, Mathaudhu, SN, eds (2011) TMS Magnesium Technology 2011, San Diego, CA, USA. Center for Advanced Vehicular Systems, Mississippi State University, Mississippi State, MS, USA
In-Situ Scanning Electron Microscopy Comparison of Microstructure and Deformation Behavior between WE43-F and WE43-T5 Magnesium Alloys T. Sano, J. Yu, B. Davis, R. DeLorme, and K. Cho Sillekens, WH, Agnew S.R., Neelameggham NR, Mathaudhu, SN, eds (2011) TMS Magnesium Technology 2011, San Diego, CA, USA. US. Army Research Laboratory, Materials and Manufacturing Science Division, Aberdeen Proving Ground, MD 21005 USA
Influence of Crystallographic Orientation on Twin Nucleation in Single Crystal Magnesium C. Barrett, M. Tschopp, H. El Kadiri, and B. Li Sillekens, WH, Agnew S.R., Neelameggham NR, Mathaudhu, SN, eds (2011) TMS Magnesium Technology 2011, San Diego, CA, USA. Center for Advanced Vehicular Systems Mississippi State University, Starkville, MS USA
Influence of Solute Cerium on the Deformation Behavior of an Mg-0.5wt.%Ce Alloy L. Jiang, J. Jonas, and R. Mishra Sillekens, WH, Agnew S.R., Neelameggham NR, Mathaudhu, SN, eds (2011) TMS Magnesium Technology 2011, San Diego, CA, USA. Department of Materials Engineering, McGill University, Montreal, QC, H3A 2B2, Canada
JIM INTERNATIONAL SCHOLAR AWARD WINNER: Fracture Mechanism and Toughness in Fine- and Coarse-Grained Magnesium Alloys H. Somekawa, A. Singh, and T. Mukai Sillekens, WH, Agnew S.R., Neelameggham NR, Mathaudhu, SN, eds (2011) TMS Magnesium Technology 2011, San Diego, CA, USA. Structural Metals Center, National Institute for Materials Science, 1-2-1 Sengen, Tsukuba, Ibaraki 305-0047 Japan
Microstructural Relationship in the Damage Evolution Process of an Az61 Magnesium Alloy M. Lugo, J. Jordon, M. Horstemeyer, and M. Tschopp Sillekens, WH, Agnew S.R., Neelameggham NR, Mathaudhu, SN, eds (2011) TMS Magnesium Technology 2011, San Diego, CA, USA. Center for Advanced Vehicular Systems (CAVS), Mississippi State University, Mississippi State, MS 39762, USA
Nucleation Mechanism for Shuffling Dominated Twinning in Magnesium S. Kim, H. El Kadiri, and M. Horstemeyer Sillekens, WH, Agnew S.R., Neelameggham NR, Mathaudhu, SN, eds (2011) TMS Magnesium Technology 2011, San Diego, CA, USA. Center for Advanced Vehicular Systems, Mississippi State University, Mississippi State, MS 39762
On the Impact of Second Phase Particles on Twinning in Magnesium Alloys M. Barnett, N. Stanford, J. Geng, and J. Robson Sillekens, WH, Agnew S.R., Neelameggham NR, Mathaudhu, SN, eds (2011) TMS Magnesium Technology 2011, San Diego, CA, USA. Centre for Material and Fibre Innovation, ITRI, Deakin University, Pigdons Rd, Geelong 3217, Australia
Texture Weakening Effect of Y in Mg-Zn-Y System S. Farzadfar, M. Sanjari, I. Jung, E. Es-Sadiqi, and S. Yue Sillekens, WH, Agnew S.R., Neelameggham NR, Mathaudhu, SN, eds (2011) TMS Magnesium Technology 2011, San Diego, CA, USA. McGill University, Department of Materials Engineering, Montreal, QC, Canada H3A 2B2
An Elasto-Plastic Micromechanical Method for Twin Driven Plasticity L. Capolungo, P. Juan, and S. Berbenni Mathaudhu, SN, Sillekens, WH, Neelameggham N.R., Hort N, eds (2012) TMS Magnesium Technology 2012, Orlando, FL, USA. Georgia Institute of Technology, UMI-GT CNRS 2958, Metz, 57070, France
Anomalous Twin Bands in AZ31 Mg Sheet Bending J. Baird, B. Li, S. Yazdan Parast, S. Horstemeyer, H. El Kadiri, P. Wang, and M. Horstemeyer Mathaudhu, SN, Sillekens, WH, Neelameggham N.R., Hort N, eds (2012) TMS Magnesium Technology 2012, Orlando, FL, USA. Center for Advanced Vehicular Systems, Mississippi State University, USA
Effect of Zn Concentration and Grain Size on Prismatic Slip in Mg-Zn Binary Alloys N. Stanford, and M. Barnett Mathaudhu, SN, Sillekens, WH, Neelameggham N.R., Hort N, eds (2012) TMS Magnesium Technology 2012, Orlando, FL, USA. Center of Excellence for Design in Light Metals, Deakin University, Pigdons Road Geelong, Victoria, Australia 3217
Evaluating the Effect of Pre-Ageing Deformation on ß' Precipitate Size and Distribution in Mg-Zn(-Y) Alloys J. Rosalie, H. Somekawa, A. Singh, and T. Mukai Mathaudhu, SN, Sillekens, WH, Neelameggham N.R., Hort N, eds (2012) TMS Magnesium Technology 2012, Orlando, FL, USA. Microstructure Design Group, National Institute for Materials Science (NIMS), Sengen 1-2-1, Tsukuba, Ibaraki, 305-0047, Japan.
Experimental Investigations into the Deformation Behavior of Thixo-Molded Mg AZ61L Sheet Alloy M. Koc, O. Cora, R. Snell, R. Dekker, and J. Huang Mathaudhu, SN, Sillekens, WH, Neelameggham N.R., Hort N, eds (2012) TMS Magnesium Technology 2012, Orlando, FL, USA. Istanbul Sehir University, Istanbul, Turkey
Formation of Nano-Scale Twins and Low Angle Grain Boundaries during Fracture of Fine Grained Magnesium Alloys A. Singh, H. Somekawa, and T. Mukai Mathaudhu, SN, Sillekens, WH, Neelameggham N.R., Hort N, eds (2012) TMS Magnesium Technology 2012, Orlando, FL, USA. Structural Materials Unit, Research Center for Strategic Materials, National Institute for Materials Science, Sengen 1-2-1, Tsukuba, Ibaraki 305-0047, Japan
Microstructural Characteristics of High Rate Plastic Deformation in Elektron WE43 Magnesium Alloys J. Hamilton, S. Brennan, Y. Sohn, B. Davis, R. DeLorme, and K. Cho Mathaudhu, SN, Sillekens, WH, Neelameggham N.R., Hort N, eds (2012) TMS Magnesium Technology 2012, Orlando, FL, USA. University of Central Florida; 12443 Research Parkway, Suite 304; Orlando, FL 32826, USA
Microstructure Modification and Deformation Behavior of Fine-Grained AZ61 Sheet Produced by Thixomolding and Thermomechanical Processing (TTMP) T. Berman, W. Donlon, V. Miller, J. Huang, R. Decker, T. Pollock, and J. Jones Mathaudhu, SN, Sillekens, WH, Neelameggham N.R., Hort N, eds (2012) TMS Magnesium Technology 2012, Orlando, FL, USA. Materials Science and Engineering, University of Michigan, 2300 Hayward St; Ann Arbor, MI, 48109, USA
Nano-Indentation Studies of Twinned Magnesium Single Crystals F. Hiura, R. Mishra, M. Lukitsch, and M. Niewczas Mathaudhu, SN, Sillekens, WH, Neelameggham N.R., Hort N, eds (2012) TMS Magnesium Technology 2012, Orlando, FL, USA. McMaster University (Materials Science and Engineering); 1280 Main St. West; Hamilton, ON L8S4M1, CANADA
On the Deformed Microstructure of Rolled Mg-2.9Y A. Farzadfar, M. Sanjari, I. Jung, E. Essadiqi, and S. Yue Mathaudhu, SN, Sillekens, WH, Neelameggham N.R., Hort N, eds (2012) TMS Magnesium Technology 2012, Orlando, FL, USA. McGill University, Department of Materials Engineering, Montreal, QC, Canada
Precipitation Formation and Grain Refinement of Mg-Al-Sn Alloy during Hot Deformation A. Kabir, J. Su, P. Vo, I. Jung, and S. Yue Mathaudhu, SN, Sillekens, WH, Neelameggham N.R., Hort N, eds (2012) TMS Magnesium Technology 2012, Orlando, FL, USA. Department of Mining and Materials Engineering, McGill University, 3610 University Street, Montreal, Canada H3A 2B2
Structural Origin of Reversible Twinning, Non-Schmid Effect, Incoherent Twin Boundaries and Texture of Hexagonal Close-Packed Metals B. Li, X. Zhang, H. El Kadiri, S. Mathaudhu, and Q. Ma Mathaudhu, SN, Sillekens, WH, Neelameggham N.R., Hort N, eds (2012) TMS Magnesium Technology 2012, Orlando, FL, USA. Center for Advanced Vehicular Systems, Mississippi State University, Starkville, MS 39759, USA
Tensile and Creep Deformation Mechanisms in Rolled AZ31 Z. Chen, C. Boehlert, I. Gutiérrez-Urrutia, J. Llorca, and M.T. Pérez-Prado Mathaudhu, SN, Sillekens, WH, Neelameggham N.R., Hort N, eds (2012) TMS Magnesium Technology 2012, Orlando, FL, USA. Michigan State University, East Lansing, Michigan 48824-1226, USA
High Temperature Deformation of Magnesium Alloy TX32-0.4Al-0.8Si C. Dharmendra, K. Rao, N. Hort, and K. Kainer Hort, N, Mathaudhu, SN, Neelameggham NR, Alderman, M, eds (2013) TMS Magnesium Technology 2013, San Antonio, TX, USA. Department of Mechanical and Biomedical Engineering City University of Hong Kong, 83 Tat Chee Avenue, Kowloon, Hong Kong SAR
Increasing Volume Fraction of Precipitates and Strength of a Mg-Zn-Y Alloy by Pre-Aging Deformation J. Rosalie, H. Somekawa, A. Singh, and T. Mukai Hort, N, Mathaudhu, SN, Neelameggham NR, Alderman, M, eds (2013) TMS Magnesium Technology 2013, San Antonio, TX, USA. Structural Materials Unit, National Institute for Materials Science, Tsukuba, 305-0047, Japan
Interaction between a Mg17Al12 Precipitate and {1012} <1012> Twin Boundary in Magnesium Alloys B. Li, and S. Mathaudhu Hort, N, Mathaudhu, SN, Neelameggham NR, Alderman, M, eds (2013) TMS Magnesium Technology 2013, San Antonio, TX, USA. Center for Advanced Vehicular Systems, Mississippi State University, 200 Research Blvd. Starkville, MS 39759, USA
Texture Development in an Extruded Magnesium Alloy during Compression along the Transverse Direction D. Sarker, and D. Chen Hort, N, Mathaudhu, SN, Neelameggham NR, Alderman, M, eds (2013) TMS Magnesium Technology 2013, San Antonio, TX, USA. Department of Mechanical and Industrial Engineering, Ryerson University, 350 Victoria Street, Toronto, Ontario M5B 2K3, Canada
The Influence of Deformation Mechanisms on Rupture of AZ31B Magnesium Alloy Sheet at Elevated Temperatures A. Antoniswamy, A. Carpenter, J. Carter, L. Hector, and E. Taleff Hort, N, Mathaudhu, SN, Neelameggham NR, Alderman, M, eds (2013) TMS Magnesium Technology 2013, San Antonio, TX, USA. The University of Texas at Austin; Materials Science and Engineering; 1 University Station C2200; Austin, TX 78712-0292, USA
Twin Boundary Migration Creating Zero Shear Strain: In-Situ TEM Observations and Atomistic Simulations B. Liu, B. Li, and Z. Shan Hort, N, Mathaudhu, SN, Neelameggham NR, Alderman, M, eds (2013) TMS Magnesium Technology 2013, San Antonio, TX, USA. Center for Advancing Materials Performance from the Nanoscale (CAMP-Nano), State Key Laboratory for Mechanical Behavior of Materials, Xi’an Jiaotong University, Xi’an, 710049, China
Acoustic Emission Analysis of Plane Strain-Compressed Mg Single Crystals Daria Drozdenko, Patrik Dobron, Michal Knapek, Dietmar Letzig, Jan Bohlen, František Chmelík Alderman, M, Manuel, MV, Hort, N, Neelameggham, NR, eds (2014) TMS Magnesium Technology 2014, San Diego, CA, USA. Charles University in Prague, Faculty of Mathematics and Physics, Department of Physics of Materials, Ke Karlovu 5, 12116, Prague 2, Czech Republic
Deformation Behavior and Dynamic Recrystallization of Micro-Alloyed Mg-Al-Ca Alloys during High Temperature Deformation Jing Su, Abu Syed Humaun Kabir, In-Ho Jung and Steve Yue Alderman, M, Manuel, MV, Hort, N, Neelameggham, NR, eds (2014) TMS Magnesium Technology 2014, San Diego, CA, USA. Department of Mining and Materials Engineering, McGill University, Montreal, Canada
Deformation Behavior of ZE10 Magnesium Alloy Sheet Patrik Dobron, Jaroslav Balík, František Chmelík, Kseniya Illková, Daria Drozdenko, Jan Bohlen, Dietmar Letzig, Pavel Lukác Alderman, M, Manuel, MV, Hort, N, Neelameggham, NR, eds (2014) TMS Magnesium Technology 2014, San Diego, CA, USA. Charles University in Prague, Faculty of Mathematics and Physics, Department of Physics of Materials, Ke Karlovu 5, 12116, Prague 2,Czech Republic
Deformation, Recrystallization and Grain Growth Behavior of Large-Strain Hot Rolled Binary Mg-1Dy Alloy I. Basu, T. and Al-Samman Alderman, M, Manuel, MV, Hort, N, Neelameggham, NR, eds (2014) TMS Magnesium Technology 2014, San Diego, CA, USA. Institut für Metallkunde und Metallphysik, RWTH Aachen, 52056 Aachen, Germany
Dislocation Activity in AZ31B Magnesium Deformed at Moderately Elevated Temperatures via EBSD T. Ruggles, A. Khosravani, D. Fullwood, M.P. Miles Alderman, M, Manuel, MV, Hort, N, Neelameggham, NR, eds (2014) TMS Magnesium Technology 2014, San Diego, CA, USA. Brigham Young University, Mechanical Engineering, 435 CTB, Provo, UT 84602
Dynamic behavior of rare earth containing Mg alloy, WE43B-T5, plate with comparison to conventional alloy, AM30-F Sean Agnew, Wilburn Wittington, Andrew Oppedal, Haitham El Kadiri, Matthew Shaeffer, K.T. Ramesh, Jishnu Bhattacharyya, Rick DeLorme and Bruce Davis Alderman, M, Manuel, MV, Hort, N, Neelameggham, NR, eds (2014) TMS Magnesium Technology 2014, San Diego, CA, USA. Materials Science and Engineering, University of Virginia, Charlottesville, Virginia, 22904-4745, USA
E ect of Microstructure on Deformation and Fracture of Thixomolded and Thermomechanically Processed AZ61 T.D. Berman, W. Donlon, R. Decker, T.M. Pollock, J.W. Jones Alderman, M, Manuel, MV, Hort, N, Neelameggham, NR, eds (2014) TMS Magnesium Technology 2014, San Diego, CA, USA. Materials Science and Engineering, University of Michigan, 2300 Hayward St; Ann Arbor, MI, 48109, USA
The Role of Deformation Modes on Dctility and Dynamic Recrystallization Behavior of AZ31 Mg Alloy at Low Temperatures E. Dogan, M. W. Vaughan, C.Hayrettin, I. Karamana, G.Ayoub Alderman, M, Manuel, MV, Hort, N, Neelameggham, NR, eds (2014) TMS Magnesium Technology 2014, San Diego, CA, USA. Department of Mechanical Engineering, Texas A&M University, College Station, TX, USA
Ballistic Characterization of the Scalability of Mg Alloy AMX602 Tyrone L. Jones, Katsuyoshi Kondoh, David Moore, Isamu Otsuka, Alan Annis, Hiroto Nakazawa, Yoshinori Ohori, Ryo Numasawa, Masamichi Takahashi Manuel, MV; Sing, A; Alderman, M, Neelameggaham, NR, eds (2015) TMS Magnesium Technology 2015, Orlando, FL. US Army Research Laboratory; RDRL-WMP-E, APG, MD 21005 USA
Crystal Plasticity Modeling of the Dynamic Behavior of Magnesium Alloy WE43-T5, Plate Jishnu Bhattacharyya, Sean Agnew, Peidong Wu, Wilburn Wittington, Haitham El Kadiri Manuel, MV; Sing, A; Alderman, M, Neelameggaham, NR, eds (2015) TMS Magnesium Technology 2015, Orlando, FL. Materials Science and Engineering, University of Virginia, Charlottesville, VA 22904, U.S.A.
Deformation and Failure Modes of Rapidly Solidified, Ultra-Fine Grain, AMX602 and ZAXE1711 Magnesium Alloys John F. Chinella Manuel, MV; Sing, A; Alderman, M, Neelameggaham, NR, eds (2015) TMS Magnesium Technology 2015, Orlando, FL. U.S. Army Research Laboratory, Aberdeen Proving Ground, MD 21005
Deformation Behavior of Rolled Magnesium Slabs and Twin Roll Cast Strips Studied by the Acoustic Emission Technique Patrik Dobro, Daria Drozdenko, Jan Bohlen, Dietmar Letzig, František Chmelík Manuel, MV; Sing, A; Alderman, M, Neelameggaham, NR, eds (2015) TMS Magnesium Technology 2015, Orlando, FL. Charles University in Prague, Faculty of Mathematics and Physics, Department of Physics of Materials, Ke Karlovu 5, 12116, Prague 2, Czech Republic
Deformation Response of Mg-Y Alloys under Dynamic Loading Toshiji Mukai, Masaki Nagao, Tomofumi Terada, Hidetoshi Somekawa, Alok Singh Manuel, MV; Sing, A; Alderman, M, Neelameggaham, NR, eds (2015) TMS Magnesium Technology 2015, Orlando, FL. Mechanical Engineering Department (Kobe University); 1-1 Rokkodai-cho, Nada; Kobe, Hyogo 657-8501, Japan
Deformation Twinning Effects on Texture and Microstructure of AZ31B Magnesium Rolled Samples Litzy L Choquechambi Catorceno, Luis Flavio Gaspar Herculano, Hamilton Ferreira Gomes de Abreu Manuel, MV; Sing, A; Alderman, M, Neelameggaham, NR, eds (2015) TMS Magnesium Technology 2015, Orlando, FL. UFC (Federal University of Ceará- Department of Metallurgical Engineering and Materials); Bloco 729, Campus do Pici; Fortaleza, CE 60440-554, Brazil.
Dislocation-Twin Interactions in Magnesium Alloy AZ31 Fulin Wang and Sean Agnew Manuel, MV; Sing, A; Alderman, M, Neelameggaham, NR, eds (2015) TMS Magnesium Technology 2015, Orlando, FL. Materials Science and Engineering, University of Virginia, Charlottesville, Virginia, 22904-4745, USA
Effect of Dynamic Strain Aging on the Strain Rate Sensitivity of Mg-2Zn-2Nd Alloy Tong Wang, Stephen Yue, John J. Jonas Manuel, MV; Sing, A; Alderman, M, Neelameggaham, NR, eds (2015) TMS Magnesium Technology 2015, Orlando, FL. Department of Materials Engineering, McGuill University, Montreal, Q.C., H3A 2B2, Canada
Effect of Solute Segregation on Fracture Behavior of Mg Alloy Tomoaki Kawa, Masatake Yamaguchi, Naoko Ikeo, Toshiji Mukai Manuel, MV; Sing, A; Alderman, M, Neelameggaham, NR, eds (2015) TMS Magnesium Technology 2015, Orlando, FL. Mechanical Engineering Department (Kobe University); 1-1 Rokkodai-cho, Nada; Kobe, Hyogo 657-8501, Japan
Effects of Texture and Alloying Elements on Stretch Formability of Mg Alloy Sheets Byeong-Chan Suh, Jae H. Kim, Jun Ho Bae, Nack J. Kim Manuel, MV; Sing, A; Alderman, M, Neelameggaham, NR, eds (2015) TMS Magnesium Technology 2015, Orlando, FL. Pohang University of Science and Technology (POSTECH), Pohang 790-784, Korea
Geometrically Necessary Twins in Bending of an AZ31 Sheet Bin Li, Z. McClelland, S.J. Horstemeyer Manuel, MV; Sing, A; Alderman, M, Neelameggaham, NR, eds (2015) TMS Magnesium Technology 2015, Orlando, FL. Department of Chemical and Materials Engineering, University of Nevada, Reno, NV 89557, USA
Hot Compression Behavior of Magnesium Alloys ZE20 and AM30 Scott Sutton, Alan A. Luo Manuel, MV; Sing, A; Alderman, M, Neelameggaham, NR, eds (2015) TMS Magnesium Technology 2015, Orlando, FL. Department of Materials Science and Engineering, The Ohio State University, Columbus, OH 43210, USA
In-Situ Neutron Diffraction Study of the Deformation Mechanisms in Solutionized Mg-Zn Alloys R.P. Mulay, S.R. Agnew, C.H. Caceres Manuel, MV; Sing, A; Alderman, M, Neelameggaham, NR, eds (2015) TMS Magnesium Technology 2015, Orlando, FL. Lawrence Livermore National Laboratories, Livermore, California, 94550, USA
Investigation of Compression Behavior of Mg-4Zn-2(Nd, Gd)-0.5Zr at 350 C by In Situ Synchrotron Radiation Diffraction R. H. Buzolin, D. Tolnai, C. L. Mendis, A. Stark, N. Schell, H. Pinto, K. U. Kainer, N. Hort Manuel, MV; Sing, A; Alderman, M, Neelameggaham, NR, eds (2015) TMS Magnesium Technology 2015, Orlando, FL. Institute of Materials Research, Helmholtz-Zentrum Geesthacht, Germany Max-Planck-Strasse 1,D 21502, Geesthacht, Germany
Large Strain Behaviour of ZEK100 Magnesium Alloy at Various Strain Rates Julie Lévesque, Srihari Kurukuri, Raja Mishra, Michael Worswick, Kaan Inal Manuel, MV; Sing, A; Alderman, M, Neelameggaham, NR, eds (2015) TMS Magnesium Technology 2015, Orlando, FL. Department of Mechanical Engineering, Université Laval; 1065 Avenue de la Médecine; Québec, G1V 0A6, Canada
Measuring and Modeling the Effects of Mechanical Twinning on the Behavior of Magnesium Alloys Sean Agnew, Peidong Wu, Kaan Inal, Haitham El Kadiri, Jian Wang, Carlos Tome Manuel, MV; Sing, A; Alderman, M, Neelameggaham, NR, eds (2015) TMS Magnesium Technology 2015, Orlando, FL. University of Virginia; 395 McCormick Rd; Charlottesville, VA; 22904-4745; USA
Micromechanical Modeling of Evolving Anisotropy in AZ31 Mg for Various Strain Paths Nitin Chandola, Oana Cazacu, Raja. K. Mishra Manuel, MV; Sing, A; Alderman, M, Neelameggaham, NR, eds (2015) TMS Magnesium Technology 2015, Orlando, FL. University of Florida, Dept. of Mechanical and Aerospace Engineering, REEF,1350 N. Poquito Road Shalimar, FL 32579, USA
New Model Predicting the Unusual Buckling Behavior of AZ31 Mg Nitin Chandola, Oana Cazacu, Benoit Revil-Baudard Manuel, MV; Sing, A; Alderman, M, Neelameggaham, NR, eds (2015) TMS Magnesium Technology 2015, Orlando, FL. University of Florida, Dept. of Mechanical and Aerospace Engineering,REEF,1350 N. Poquito Road Shalimar, FL 32579, USA
Role of Tensile Twinning on Fracture Behavior of Magnesium AZ31 Alloy Subrahmanya Prasad Narla, Narasimhan R, Satyam Suwas Manuel, MV; Sing, A; Alderman, M, Neelameggaham, NR, eds (2015) TMS Magnesium Technology 2015, Orlando, FL. 1Department of Mechanical Engineering, Indian Institute of Science,Bangalore 560012, India. Tel: +91-80-22932959
The Deformation Behavior, Microstructure and Mechanical Properties of Cast and Extruded Mg-1Mn-xNd (wt%) at Temperatures between 50C and 250C A. Chakkedath, J. Bohlen, S. Yi, D. Letzig, Z. Chen, and C.J. Boehlert Manuel, MV; Sing, A; Alderman, M, Neelameggaham, NR, eds (2015) TMS Magnesium Technology 2015, Orlando, FL. Michigan State University, East Lansing, Michigan 48824-1226, USA
The Deformation Gradient of Interfacial Defects on Twin-like interfaces Christopher Barrett, Haitham El Kadiri Manuel, MV; Sing, A; Alderman, M, Neelameggaham, NR, eds (2015) TMS Magnesium Technology 2015, Orlando, FL. Department of Mechanical Engineering, Carpenter Building, Mississippi State University, Mississippi State, MS,39762, USA
Why Do Magnesium Alloys Develop Sharp Textures Upon Dynamic Recrystallization? Haitham El Kadiri, Christopher D. Barrett, Aidin Imandoust, Sean R. Agnew, Mohammed Cherkaoui, Kaan Inal Manuel, MV; Sing, A; Alderman, M, Neelameggaham, NR, eds (2015) TMS Magnesium Technology 2015, Orlando, FL. Department of Mechanical Engineering, Mississippi State University, Starkville, MS 39762, United States
Texture formation and texture modelling of AZ31 magnesium wrought alloy Styczinski A., Hartig C., Bormann R., Kaiser F., Letzig D., Bohlen J. Kainer, KU editor (2003) Proceedings of the 6th International Conference on Magnesium Alloys and their Applications, Wolfsburg, Germany. GKSS Research Centre Geesthacht, Germany
Acoustic emission study of the mechanical anisotropy of AZ31 magnesium alloy sheet Dobron P., Chmelik F., Lukac P., Bohlen J., Letzig D., Kainer K.U. Kainer, KU editor (2006) Magnesium: Proceedings of the 7th International Conference on Magnesium Alloys and Their Applications, 2006, DGM, Frankfurt, Germany. GKSS Research Centre Geesthacht, Germany
Effects of Calcium on texture evolution and plastic anisotropy of the magnesium alloy AZ31 Ebeling T., Hartig C., Bormann R., Bohlen J., Letzig D. Kainer, KU editor (2006) Magnesium: Proceedings of the 7th International Conference on Magnesium Alloys and Their Applications, 2006, DGM, Frankfurt, Germany. GKSS Research Centre Geesthacht, Germany
Experimental and Numerical Investigation of Texture Development During Hot Rolling of Magnesium Alloys R. Kawalla, C. Schmidt, H. Riedel, A. Prakash Kainer, KU editor (2006) Magnesium: Proceedings of the 7th International Conference on Magnesium Alloys and Their Applications, 2006, DGM, Frankfurt, Germany. Freiberg University of Mining and Technology, Freiberg
Experimental and Numerical Investigation of Texture Development During Hot Rolling of Magnesium Alloys R. Kawalla, C. Schmidt, H. Riedel, A. Prakash Kainer, KU editor (2006) Magnesium: Proceedings of the 7th International Conference on Magnesium Alloys and Their Applications, 2006, DGM, Frankfurt, Germany. Freiberg University of Mining and Technology, Freiberg
Fatigue crack propagation behavior of Mg-Al-Zn alloys Han E. H., Ke W., Dietzel W., Kainer K.U., Zeng R.C. Kainer, KU editor (2006) Magnesium: Proceedings of the 7th International Conference on Magnesium Alloys and Their Applications, 2006, DGM, Frankfurt, Germany. GKSS Research Centre Geesthacht, Germany
Texture development in different routes ECAP processed Mg-Si alloys by neutron diffraction Zheng M., Qiao X., Xu S., Hu X., Wu K., Gan W., Schreyer A., Kainer K.U., Brokmeier H.G., Schwebke B. Kainer, KU editor (2006) Magnesium: Proceedings of the 7th International Conference on Magnesium Alloys and Their Applications, 2006, DGM, Frankfurt, Germany. GKSS Research Centre Geesthacht, Germany
The influence of Calcium and Cerium mischmetal on the deformation behavior of Mg-3-Al-Zn Laser T., Hartig C., Bormann R., Nürnberg M, Letzig D. Kainer, KU editor (2006) Magnesium: Proceedings of the 7th International Conference on Magnesium Alloys and Their Applications, 2006, DGM, Frankfurt, Germany. GKSS Research Centre Geesthacht, Germany
The Influence of Calcium and Cerium Mischmetal on the Deformation Behavior of Mg-3A1-1Zn T. Laser, Ch. Hartig, R. Bormann, M.R. Nürnberg, D. Letzig Kainer, KU editor (2006) Magnesium: Proceedings of the 7th International Conference on Magnesium Alloys and Their Applications, 2006, DGM, Frankfurt, Germany. Hamburg University of Technology, Hamburg, Germany
A Novel Warm Tube Hydroforming Facility for Magnesium Tubes Processing J.A. Esnaola, I. Torca, G. Arruebarrena, L. Galdos, C. Garcia Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. Mechanical and Manufacturing Department, Mondragon Univertsitatea, Mondragon, Spain
Ab Initio Determined Materials-Design Limits in Ultra Light-Weight Mg-Li Alloys W. Counts, M. Friák, D. Raabe, J. Neugebauer Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. Max-Planck-Institut für Eisenforschung GmbH, Düsseldorf, Germany
Application of the Work hardening Model for Mechanical Anisotrophy Study of AZ31 Magnesium Alloy Sheet K. Máthis, Z. Zdražilová, P. Dobron, F. Chmelík, J. Balík, J. Bohlen, D. Letzig Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. Cepartmetn of Physics of Materials, Faculty of Mathematics and Physics, Charles University, Prague, Czech Republic
Crashworthiness Simulation of Mg Die Casting Parts Including Local Properties from Process Simulation H. Gese, G. Oberhofer, A. Bach, U. Weiss, N. Nowack, P. Bernbeck Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. MATFEM Partnerschaft
Development of Microstructure and Texture of Magnesium Alloy ZEK 100 during Hot Rolling J. Wendt, K. Hantzsche, J. Bohlen, K. U. Kainer, Sangbong Yi, D. Letzig Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. University of Technology, Hamburg, Germany
Effect of Blankhold Pressure on the Deep Drawing of Magnesium Sheets W. Bang Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. Research Institute of Industrial Science and Technology (RIST), Pohang, Sough Korea
Experimental and Numerical Investigation of the Activation of Pyramidal Slip during Deformation of Rolled Magnesium Alloy AZ31 A. Prakash, C. Schmidt, H. Riedel, R. Kawalla Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. Fraunhofer Institute for Mechanics of materials IWM, Freiburg, Germany
Fatigue Life and Cyclic Deformation Behavior of Microalloyed Wrought Magnesium Alloys in Corrosive Environments C. Fleck, P.Maier Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. Berlin Institute of Technology, Berlin, Germany
Forming Limit of Magnesium Alloy in Warm Forging Using CNC Servo Press with Controlled Forming Speed R. Matsumoto, Y. Togase, K. Osakada Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. Osaka University, Osaka, Japan
Influence of Alloy Composition and Heat Treatment on Damping Characteristics of Magnesium Alloys G. L. Angrisani, C. Klose, D. Bormann, Fr.-W. Bach Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. Leibniz University of Hanover, Hanover, Germany
Influence of Direct Aging on the Damping Behaviour of the Magnesium Alloy AZ81 R. González-Martínez, D. Letzig, K.U. Kainer Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. GKSS Research Centre Geesthacht, Germany
Microstructure and Texture Effects on the Dyclic Plasticity of Extruded magnesium Alloy L. Strutz, D. Letzig, K.U. Kainer Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. GKSS Research Centre Geesthacht, Germany
Recrystallisation Texture Weakening in Mg Alloyed with Misch Metal - Effect of Deformation Mode, Strain and Initial Grain Size N. Stanford, Gang Sha, A. Beer, S. Ringer, M. R. Barnett Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. Centre of Excellence for Design in Light Metals, Deakin University, Victoria, Australia
Study of Deformation and Annealing Textures in Symetrically and Asymmetrically cold Rolled AZ80 Magnesium Alloy J. Jain, W.J. Poole, C.W. Sinclair, C. Necker Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. Department of Materials Engineering, The University of British Columbia, Vancouver B.C., Canada
Textures at Deformation Region of an ECA Ped Mg by Synchrotron Diffraction W.M. Gan, H.-G. Brokmeier, C. Randau, M.Y. Zheng, H. Chang, G.D. Fan, K. Wu Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. GKSS Research Centre Geesthacht, Germany
The role of Deformation Twinning during Fracture Behavior in AZ31 D. Ando, J. Koike Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. Department of Materials Science, Tohoku University, Sendai, Japan
X-Ray NanoCT of Light Metal Samples: Visualizing of Internal 3D-Structures with Submicrometer Resolution S. Becker, O. Brunke, M. Röder Kainer, KU editor (2009) Magnesium: Proceedings of the 8th International Conference on Magnesium Alloys and Their Applications, 2009, DGM, Weimar, Germany. GE Sensing & Inspection Technologies BmbH (phoenix/ x-ray), Wunstorf, Germany
A Rationale for Deformation Twinning in Nanocrystalline Magnesium and Magnesium AZ80 Alloy Suveen N. Mathaudhu, Weizong Xu, Baolong Zheng, Yuntian, T. Zhu and Enrique Lavernia Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. U.S. Army Research Laboratory, Weapons and Materials Research Directorate Aberdeen Proving Ground, MD 21005-5069, USA
A Study on the Origin of Shear Bands in Cold Rolled Mg-3Y Alloy using 3D EBSD Stefan Zaefferer, Jingqi Chen, Peter Konijnenberg Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. Max-Plank-Institute for Iron Research, Max-Planck-Str. 1, Duesseldorf 40237, Germany
An Extended Taylor Model to Simulate Detwinning in Magnesium Alloys R. K. Mishra, J. Lévesque, A. Brahme, K. Inal Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. General Motors Research and Development Center, 30500 Mound Road, Warren, MI 48090- 9055, U.S.A
Complementary TEM and Ab Initio Study on the Ductilizing Effect of Y in Solid Solution Mg-Y Alloys S. Sandlöbes, M. Friák, A. Dick, S. Zaefferer, S. Yi, D. Letzig, Z. Pei, L.-F. Zhu, J. Neugebauer, D. Raabe Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. Max-Planck-Institut für Eisenforschung, Department for Microstructure Physics and Alloy Design, Max-Planck-Str. 1, 40237 Düsseldorf, Germany
Deformation Behavior of Mg Single Crystals During an ECAP Pass Hiromoto Kitahara, Fumiaki Maruno, Masayuki Tsushida, Shinji Ando Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. Department of Materials Science and Engineering, Kumamoto University
Deformation Behavior of Solid-Solution-Strengthened Mg-9Wt.%Al Alloy Subjected to Uniaxial Tension S.Y. Lee, M.A. Gharghouri, H. Wang, G. Nayyeri, P.D. Wu, W.J. Poole, W. Wu, K. An Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. Department of Materials Science and Engineering, Chungnam National University, Daejeon, 305-764, South Korea
Deformation Behaviour of AZ80 Subject To Multi-Axial Tensile Loading P.S. Tomlinson, W.J. Poole, C.W. Sinclair, M.A. Gharghouri Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. The University of British Columbia, 6350 Stores Rd., Vancouver, B.C., V6T 1Z4, Canada
Development of SEM-Based Techniques to Characterize Hot-Deformation Behaviour of Magnesium Alloys Shirin Kaboli, Raynald Gauvin Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. McGill University; 3610 University Street; Montreal, QC, H3A 2B2, Canada
Dynamic Characterization of AZ31b and ZEK100 Magnesium Alloy Sheets Srihari Kurukuri, Dariush G. Tari, Michael J. Worswick, Raja K. Mishra, Jon T. Carter Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. University of Waterloo; 200 University Avenue West, Waterloo, ON, N2L 3G1, Canada
Effect of Al Content on Tension-Compression Yield Asymmetry of Magnesium Alloy Tianmo Liu, Chengling Lv, Liyang Lina, b , Dejun Liu , Shan Jianga Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China
Effect of Deformation Conditions on Microstructure and Texture During Compression of Mg-3Sn-2Ca-0.4Al-0.4Si Alloy C. Dharmendra, K.P. Rao, Y.V.R.K. Prasad, N. Hort, K.U. Kainer Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. Department of Mechanical and Biomedical Engineering, City University of Hong Kong, 81 Tat Chee Avenue, Kowloon, Hong Kong SAR, China
Effect of Deformation Temperature on the Microstructures and Mechanical Properties of High-Strength Extruded Mg-Al-Ca-Mn Alloy S.W. Xu, K. Oh-ishi , H. Takahashi , T. Homma and S. Kamado Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. Helmholtz-Zentrum Geesthacht Zentrum für Material- und Küstenforschung GmbH; Max-Planck-Straße 1; Geesthacht, 21502, Germany
Effect of Grain Boundary Misorientation on the Asymmetry, Anisotropy, and Nucleation Stresses of {102} Twinning and Non-Basal Slip in Magnesium J.C. Baird, H. El Kadiri, A.L. Oppedal, J. Kapil, Q. Ma, M.F. Horstemeyer, S. C. Vogel Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. Department of Mechanical Engineering, Mississippi State University, MS 39762, USA
Effect of multiple pre-bending and intermediate annealing on bendability of AZ31 magnesium sheet Mahdi Habibnejad-korayem, Mukesh K. Jain, and Ravi Verma Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. McMaster University, Department of Mechanical Engineering, Hamilton, On, Canada L8S4L8
Effects of Initial Orientation on Deformation Behavior of AZ31 Mg Alloy Under Biaxial Loading Condition Hyung Lae Kim, Won Kyu Bang and Young Won Chang Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. Department of Materials Science and Engineering, Pohang University of Science and Technology, Pohang 790-784, Republic of Korea
First-Principles Derivation of Nonlinear Elastic Constants of Magnesium Hajime Kimizuka, Kazuki Matsubara, Shigenobu Ogata Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. Department of Mechanical Science and Bioengineering, Graduate School of Engineering Science, Osaka University; 1-3 Machikaneyama-cho, Toyonaka, Osaka, 560-8531, Japan
Forming Limit Diagrams for Mg Alloy ZEK100 in Different Microstructural Conditions D G J. Griffiths, J. Robson, B. Davis Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. Manchester Materials Science Centre; Grosvenor St, Manchester, M17HS, UK
From Dislocation/Solute Interactions and Solute Distribution to Deformation in Magnesium Dallas R. Trinkle, Joseph A. Yasi, and Louis G. Hector, Jr Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. Department of Materials Science and Engineering, Univ. Illinois at Urbana-Champaign, Urbana, IL 61801, USA
Grain Size Influence on Deformation Behaviour of Cast Magnesium Zuzanka Trojanová, Kristián Máthis, Gergely Farkas and Pavel Luká Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. Department of Physics of Materials, Faculty Mathematics and Physics, Charles University in Prague Ke Karlovu 5, Praha 2, CZ-121 16, Czech Republic
In Situ 3D Characterisation of Damage Induced by High Temperature Deformation of Magnesium Alloys P. Lhuissier, M. Scheel, L. Salvo, M. Di Michiel, J.J. Blandin Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. Université de Grenoble / CNRS SIMAP laboratory, Grenoble-INP, UJF, 38402 Saint-Martin d’Hčres, France
In-Plane Compression and Tensile Testing of AZ31B Sheet and Their Deformation Mechanisms Vineet V. Joshi, Eric Nyberg, Ayoub Soulami, Danny J. Edwards, Alexandra Chua, Curt Lavender Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. Department of Mechanical Engineering, Nagaoka University of Technology, 1603-1 Kamitomioka, Nagaoka 940-2188, Japan
In-Situ Neutron Diffraction and Acoustic Emission Investigation of Twinning Activity in Magnesium Kristián Máthis, Premysl Beran, Petr Harcuba, Jan Capek, Petr LukᚠPoole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. Department of Physics of Materials (Faculty of Mathematics and Physics, Charles University) Ke Karlovu 5; Praha, 121 16, Czech Republic
Influence of Twinning and Precipitation on Grain Size Dependence of Compressive Strength in Mg and AZ61 Alloys Nagato Ono, Toru Nishiyama, Ryota Nakashima Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. Department of Mechanical Engineering, Sojo University 4-22-1 Ikeda; Kumamoto 860-0082, JAPAN
Localized Deformation Bands and Yield Point Elongation in Magnesium Alloy Sheet ZEK100-O Junying Min, Jon T. Carter, Louis G. Hector Jr., Ravi Verma, Jianping Lin Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. College of Mechanical Engineering, Tongji University, Shanghai, 201804, China
Microstructure and Defect Structure Evolution in AlMgZn Alloys Processed by High Pressure Torsion Miloš Janecek, Jakub Cížek, Jitka Vrátná, EunYoo Yoon, Hyoung Seop Kim Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. Charles University, Department of Physics of Materials, Prague, Czech Republic
Microstructure and Superplasticity in a Friction Stir Processed Magnesium Alloy B. Mansoor, M. Albakri, A.N. Albakri and M.K. Khraisheh Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. Masdar Institute of Science and Technology, Abu Dhabi, UAE
Microstructure and Texture Development During Rolling of Ternary Mg-Zn Alloys Containing Rare Earth Elements J. Bohlen, K. Hantzsche, K.U. Kainer, J. Wendt, L. Fuskova, P. Boelhauve, D. Letzig Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. Magnesium Innovation Centre, Helmholtz-Zentrum Geesthacht; Max-Planck Str. 1, D-21502 Geesthacht, Germany
Microstructure Evolution of As-Cast Mg-Al-Ca-Mn Alloy by Hot Extrusion K. Oh-ishi, S.W. Xu, T. Homma, S. Kamado Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. Department of Mechanical Engineering, Nagaoka University of Technology; 1603-1 Kamitomioka, Nagaoka 940-2188, Japan
Modeling the Cyclic Plasticity Behaviour of Wrought Magnesium Alloys M. Noban and H. Jahed Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. Mechancial and Mechatronics Engineering Department University of Waterloo, 200 University Ave. W, Waterloo, ON, N2L 3G1, Canada
Quantitative Measurements of Twinning in Mg and Mg-2Al Alloy D. Nagarajan, Xufang Ren, C. H. Cáceres, and J. R. Griffiths Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. ARC-Centre of Excellence for Design in Light Metals Materials Engineering, The University of Queensland, Brisbane, QLD 4072, Australia
Recrystallization Nucleation Sites in Deformed AZ31 S. Liang, P. Okrutny, X. Wang and H. S. Zurob. 663 Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. Department of Materials Science and Engineering, McMaster University, 1280 Main St. W., Hamilton, ON, Canada L8S 4L7
Shear Band Formation in Strip-Cast AZ31 Mg Alloy During Hot Compression Hyung Lae Kim, Sang Ho Ahn, Won Kyu Banga and Young Won Chang Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. Magnesium Project Team, Research Institute of Industrial Science and Technology, Pohang 790-785, Republic of Korea
Strengthening Mg Alloys when Twinning is Dominant M.R. Barnett Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. ARC Centre of Excellence for Design in Light Metals, Institute for Frontier Materials, Deakin University, Geelong, VIC, Australia
The 2 Dimensional Analysis of Void Growth and Coalescence During Deformation in Magnesium Michael J. Nemcko, David S. Wilkinson and Jidong Kang Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. McMaster University (Department of Materials Science and Engineering); 1280 Main Street West; Hamilton, ON, L8S 4L8, Canada
The Mechanism of Weak Texture Development and High Ductility for Mg-3Gd-Zn Sheet Di Wu, Rong-Shi Chen, En-Hou Han. 531 Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. 1State Key Laboratory for Corrosion and Protections, Institute of Metal Research, Chinese Academy of Sciences; 62 Wencui Road, Shenyang 110016, China
Twin Prediction in AZ31 Via Machine Learning Applied To EBSD Data Travis Rampton, Ali Khosravani, David Fullwood, Michael Miles, Raja K Mishra Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. Mechanical Engineering Department, Brigham Young University, Provo, Utah 84604
Two-Step Forming With Intermediate Anneal of ZEK100 Alloy Sheet Jon T. Carter, Raja K. Mishra Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. General Motors Research & Development, 30500 Mound Road, Warren, MI 48090, USA
Uniaxial Hot Deformation of Mg-Al-Sn Alloy Abu Syed Humaun Kabir, Jing Su, Phuong Vo, In-Ho Jung, Ravi Verma, Justin Gammage, Stephen Yue Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. Mining and Materials Engineering, McGill University; 3610 University Street; Montreal, QC H3A 2B2, Canada
Warm Forming of Twin Roll Casted AZ31 Sheet for an Automotive Part Ozgur Duygulu, Fahrettin Ozturk, Selda Ucuncuoglu, Gizem Oktay Secgin, Mustafa Yenice, Mesut Kaya Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. TUBITAK-MAC, Materials Institute, P.O.B. 21, Gebze, Kocaeli 41470, Turkey
Workability Evaluation of New Mg-Zn-Ce Alloys Andrew J. Thome, Wojciech Z. Misiolek, Alan A. Luo Poole, WJ and Kainer, KU, eds (2012) Proceedings of the 9th International Conference on Magnesium Alloy and Their Applications, July 8-12, 2012, Vancouver, BC, Canada. Institute for Metal Forming, Lehigh University 30500 Mound Road, Warren, MI, USA
Deformation and texture evolution in AZ31 magnesium alloy during uniaxial loading Yi S.B., Davies C.H.J., Brokmeier H.-G., Bolmaro R.E., Kainer K.U., Homeyer J. Volume 54 GKSS Research Centre Geesthacht, Germany
The effect of grain size on the deformation behavior of magnesium alloys investigated by the acoustic emission technique Bohlen J., Dobron P., Meza-Garcia E., Chmelik F., Lukac P., Letzig D., Kainer K. U. Volume 8 GKSS Research Centre Geesthacht, Germany
High temperature deformation behaviour of a new magnesium alloy Rao K.P., Prasad Y.V.R.K., Hort N., Huang Y., Kainer K.U. Volumes 340-341, 345-346 GKSS Research Centre Geesthacht, Germany
Analysis of Magnesium Alloy AZ31B-H24 for Ballistic Applications Jones T., Burkins M., Gooch W. Volume 291 US Army Research Laboratory, MD
Anisotropy of the Damping Capacity of Rolled Mg-0.4Zn-0.6Zr (ZK01) Alloy Peng L., Du L., Jin L., Wang O., Ding W. Volume 291 State Key Laboratory of Metal Matrix Composite, School of Materials Science and Engineering, Shanghai Jiao Tong University, China
Constitutive Behavior of Four Wrought Magnesium Alloys under Warm Forming Conditions Agnew S., Dreyer C.E., Polesack III J.F., Chiu W.V., Neil C.J., Rodriguez M. Volume 291 Materials Science and Engineering, University of Virginia, VA; Ciencia de los Materiales, Universidad Politecnica de Madrid, Spain
Deformation Mechanisms of AZ31 Magnesium Alloy Ebeling T., Hartig C., Laser T., Bormann R. Volume 291 Institute of Materials Science and Technology, Hamburg University of Technology, Germany; Institute for Materials Research, GKSS Research Centre Geesthacht, Germany; Magnesium Innovation Centre MagIC, GKSS Research Centre Geesthacht, Germany
Direct Chill Casting and Plastic Deformation of Magnesium Alloys Harel G., El Mehtedi M., Spigarelli S., Bamberger M., Evangelista E., Sereni S., Rosen G. Volume 291 Department of Materials Engineering, Technion Israeli Institute of Technology, Israel; Dipartimento Di Meccanica Universita Politecnica Della March, University of Ancona, Italy; Centro Ricerche Fiat-Societa Consortile Per Azioni, Italy
Effect of {10-11} Contraction and {10-11}-{10-12} Double Twins on the Subsequent Deformation Behavior of Two Mg Alloys Jiang L., Jonas J.J., Mishra R. Volume 291 Department of Materials Engineering, McGill University, Canada; General Motors Research & Development Center, MI
Effect of Coiling on Hot Bulge Testing of AZ31 Magnesium Sheet Carter J. Volume 291 GM R&D Center, Materials & Processes Lab, MI
Elastic Constants of Magnesium Compounds from First-Principles Calculations Ganeshan S., Zhang H., Shang S.L., Wang Y., Liu Z.-K. Volume 291 Department of Materials Science and Engineering, The Pennsylvania State University, PA
Flow Stress Modelling of Magnesium AZ31 Alloy Based on High Strain Plane Strain Compression Data Bhattacharya R., Wynne B., Rainforth M., Davies B. Volume 291 Institute for Microstructural and Mechanical Processing Engineering, The University of Sheffield (IMMPETUS), UK; Magnesium Elektron, UK
Forming Characteristics of Mg Sheet with Variation of Temperature Kwon Y.N., Lee Y.S., Lee J.H. Volume 291 Materials Processing Department, Korea Institute of Materials Science, Korea
Influence of Cerium on Texture and Ductility of Magnesium Alloy Extrusions Mishra R.K., Gupta A.K., Rao R.R., Sachdev A.K., Kumar A.M., Luo A.A. Volume 291 Materials and Processes Laboratory, General Motors Research & Development Center, MI; National Physical Laboratory, India; International Advanced Research Centre for Powder Metallurgy and New Materials, India; India Science Laboratory, General Motors Research & Development Center, India
Investigating the Effect of Strain Rate and Temperature on the Deformability and Microstructure Evolution of AZ31 Magnesium Alloy Maksoud I.A., Ahmed H., Rödel J. Volume 291 German University in Cairo, Egypt; Netherlands Institute for Metals Research (NIMR), Netherlands
Microstructure and Bendability of AM60 and AZ61 Magnesium Alloy Tubes Wang Y., Jin L., Zeng X.,Ding W., Luo A.A., Sachdev A.K., Mishra R. Volume 291 National Engineering Research Center of Light Alloys Net Forming, State Key Laboratory of Metal Matrix Composite, School of Materials Science and Engineering, Shanghai Jiao Tong University, China; Materials and Processes Laboratory, General Motors Research & Development Center, MI
Some Issues Relating to the Ductility of Wrought Magnesium Alloys Barnett M., Arhatari B., Stanford N., Beer A., Keshavarz Z., Ma X. Volume 291 Centre for Material and Fibre Innovation, GTP, Deakin University, Australia; Department of Physics, LaTrobe University, Australia
Study of Deformation Modes in AZ80 Magnesium Alloy Jain J., Poole W.J., Sinclair C.W. Volume 291 Department of Materials Engineering, The University of British Columbia, Canada
Texture Randomization of Magnesium Alloys Containing Rare Earth Elements Senn J., Agnew S. Volume 291 Materials Science and Engineering, University of Virginia, VA
The Flow Stress during Hot Compression Deformation of a Mg-Gd-Y-Zr Magnesium Alloy: Experiments and Numerical Simulations Zhang X., Wang J.T. Volume 291 Department of Materials Science and Engineering, Nanjing University of Science and Technology, China
Deformation mechanisms in an AZ31 cast magnesium alloy as investigated by acoustic emission technique Meza Garcia E., Dobron P., Bohlen J., Letzig D., Chmelik F. ,Lukac P., Kainer K. U. Volumes 444, 454-455, 460-461, 462 GKSS Research Centre Geesthacht, Germany
Plastic anisotropy and texture evolution of rolled AZ31 magnesium alloys Hartig C., Styczynski A., Kaiser F., Letzig D. Volume 482, 488-489, 495-497 GKSS Research Centre Geesthacht, Germany
Neutron diffraction study on the texture development during extrusion of Mg-AZ31 Yi S.B., Brockmeier H.-G., Kainer K.U., Letzig D., Bohlen J. Volume 350 GKSS Research Centre Geesthacht, Germany
In situ measurements of texture variation during a tensile loading of Mg-alloy AM20 using synchrotron x-ray radiation Yi S.B., Brockmeier H.-G., Bolmaro R.E., Kainer K.U., Lippmann T. Volume 50, 51 GKSS Research Centre Geesthacht, Germany

Magnesium R&D Technology